CCWJ Publications

Sort By: Category | Author | Date Download selected PDFs
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
  1. Friction stir spot welding of AM60 magnesium alloy to DP600 steel
    March 27 2008
    T. Liyanage, S. Abu-Zahra, A.P. Gerlich, M. Yamamoto, and T. Shibayanagi
    Keywords: friction stir welding, magnesium, aluminum, tungsten, shear, viscous flow
    Abstract
    Download PDF Manuscript
  1. A new method for the design of welding consumables
    June 16 2009
    D.S. Tordonato, J.C. Madeni, S. Babu, S. Liu, and P.F. Mendez
    Keywords: Button Melt, Consumable Design, Consumable Composition, Microstructure, Mathematical Mode
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  1. Comments on “Solid freeform fabrication by extrusion and deposition of semi-solid alloys”
    February 4 2004
    P.F. Mendez, C.S. Rice, and S.B. Brown
    Keywords: Semi-solids
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  2. Welding Using Semi-Solid Metals
    September 12 2002
    P.F. Mendez, C.S. Rice, and S.B. Brown
    Keywords: Semi-solids, scaling, aluminum
    Abstract
    Download PDF Manuscript
  1. Effect of Welding Parameters on Tungsten Carbide - Metal Matrix Composites Produced by GMAW
    September 28 2010
    L. Choi, W. Tonya, M. Yarmuch, and A.P. Gerlich
    Keywords: wear resistance, tungsten carbides, metal matix composites (MMCs), overlays
    Abstract
    Download PDF Manuscript
  1. Wrinkling Phenomena to Explain Vertical Fold Defects in DC-Cast Al-Mg4.5
    March 12 2008
    J.L. Davis, and P.F. Mendez
    Keywords: oxide, film, vertical fold, can end stock, CES, AA5182, wrinkle, molten aluminum, pseudo-plasticity
    Abstract
    Download PDF Manuscript
  1. Interfacial heating during low-pressure cold-gas dynamic spraying of aluminum coatings
    July 11 2011
    M.P. Dewar, A.G. McDonald, and A.P. Gerlich
    Keywords: cold spray, local heating, Johnson-Cook, plastic flow
    Abstract
    | Published Article & Citation |
  1. Advanced scaling techniques for the modeling of materials processing
    April 19 2009
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: scaling, Gas Tungsten Arc Welding (GTAW), Friction stir welding, multiphysics
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  2. Advanced Scaling Techniques for the Modeling of Materials Processing
    July 20 2009
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: scaling, Gas Tungsten Arc Welding (GTAW), Friction stir welding, multiphysics
    Abstract
    Download PDF Manuscript
  3. Modeling of Weld Penetration in High Productivity GTAW
    February 24 2011
    U. Duman, and P.F. Mendez
    Keywords: high productivity welding, gas tungsten arc welding (GTAW)
    Abstract
    Download PDF Manuscript
  4. Modeling of weld penetration in high velocity GTAW
    February 27 2011
    U. Duman, and P.F. Mendez
    Keywords: Welding, Modeling, Scaling, GTAW, Gouging Region, Penetration Depth
    Abstract
    | Published Article & Citation
  5. Scaling Laws for the Welding Arc, Weld Penetration, and Friction Stir Welding
    June 3 2008
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: Scaling, multiphysics, friction stir welding, weld penetration
    Abstract
    Download PDF Manuscript
  6. Scaling Laws for the Welding Arc, Weld Penetration, and Friction Stir Welding
    June 3 2008
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: Scaling, multiphysics, friction stir welding, weld penetration
    Abstract
    Download PDF Manuscript
<< Previous 1 2 3 . . . 17 18 Next >>

© 2012 CCWJ. All Rights Reserved.