CCWJ Publications

Sort By: Category | Author | Date Download selected PDFs
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
  1. Fabrication of an aluminum-carbon nanotube metal matrix composite by accumulative roll-bonding
    September 2 2010
    S. Salimi, H. Izadi, and A.P. Gerlich
    Keywords: Accumulative roll-bonding, aluminum, metal matrix composite, Carbon nanotubes
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  1. Calorimetric Measurement of Droplet Temperature in GMAW
    October 18 2010
    E.J. Soderstrom, K.M. Scott, and P.F. Mendez
    Keywords: Gas Metal Arc Welding (GMAW), Droplet Temperature, Globular Transfer, Spray Transfer, Stainless Steel, Aluminum
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  1. Friction stir spot welding of AM60 magnesium alloy to DP600 steel
    March 27 2008
    T. Liyanage, S. Abu-Zahra, A.P. Gerlich, M. Yamamoto, and T. Shibayanagi
    Keywords: friction stir welding, magnesium, aluminum, tungsten, shear, viscous flow
    Abstract
    Download PDF Manuscript
  2. Grain boundary sliding during friction stir spot welding of an aluminum alloy
    October 8 2008
    A.P. Gerlich, and T. Shibayanagi
    Keywords: Friction stir; Spot welding; Grain boundary sliding; Al 2024
    Abstract
    | Published Article & Citation |
  3. Liquid film formation and cracking during friction stir welding
    May 1 2011
    A.P. Gerlich, and T. Shibayanagi
    Keywords: Friction stir, Liquation cracking, Al 2024 alloy, Local melting
    Abstract
    | Published Article & Citation |
  4. Melted film formation and cracking in Al 2024 friction stir spot welds
    March 27 2008
    A.P. Gerlich, D.K. Lim, and T. Shibayanagi
    Keywords: friction stir welding, aluminum, local melting, stir zone, cracking
    Abstract
    Download PDF Manuscript
  5. Selection of Welding Parameter during Friction Stir Spot Welding
    April 1 2009
    A.P. Gerlich, M. Yamamoto, T. Shibayanagi, and T.H. North
    Keywords: Friction stir welding, aluminum, magnesium, spot welding, parameters, cracking
    Abstract
    | Published Article & Citation
  6. Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing
    November 30 2008
    D.K. Lim, T. Shibayanagi, and A.P. Gerlich
    Keywords: Friction stir processing; Carbon nanotubes; Metal matrix composite; Aluminium
    Abstract
    | Published Article & Citation |
  7. Textures in Single-Crystal Aluminum Friction Stir Spot Welds
    January 30 2009
    T. Shibayanagi, A.P. Gerlich, K. Kashihara, and T.H. North
    Keywords: textures, aluminum, friction stir welding, stir zone, EBSD
    Abstract
    | Published Article & Citation |

© 2012 CCWJ. All Rights Reserved.