CCWJ Publications

Sort By: Category | Author | Date Download selected PDFs
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
  1. Effect of microstructure on liquation cracking during AZ91 friction stir spot welding
    November 1 2010
    S. Horie, K. Shinozaki, M. Yamamoto, T.H. North, and A.P. Gerlich
    Keywords: Friction stir spot welding, Mg alloy, Hot cracking, Base material structure
    Abstract
    | Published Article & Citation |
  1. Calorimetric Measurement of Droplet Temperature in GMAW
    October 18 2010
    E.J. Soderstrom, K.M. Scott, and P.F. Mendez
    Keywords: Gas Metal Arc Welding (GMAW), Droplet Temperature, Globular Transfer, Spray Transfer, Stainless Steel, Aluminum
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  2. Humping mechanisms present in high speed welding
    February 9 2006
    E.J. Soderstrom, and P.F. Mendez
    Keywords: Humping, Beading, Undercutting, Defect formation, High-Speed Welding
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  3. Metal Transfer during GMAW with Thin Electrodes & Ar-CO2 Shielding Gas Mixtures
    August 20 2007
    E.J. Soderstrom, and P.F. Mendez
    Keywords: Gas Metal Arc Welding, Droplet Detachment, DCEP, CO2, Shielding Gas, Contact Tip, Metal Transfer Mode
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  1. Examination of Pitting Fatigue in Carburized Steels with Controlled Retained Austenite Fractions
    December 18 2005
    R.M. Wagar, J.G. Speer, D.K. Matlock, and P.F. Mendez
    Keywords: rolling, wear, carburizing, retained austenite, pitting
    Abstract
    Download PDF Manuscript | Published Article & Citation
  1. Material flow and intermixing during dissimilar friction stir welding
    April 1 2008
    A.P. Gerlich, P. Su, M. Yamamoto, and T.H. North
    Keywords: friction stir; intermixing; aluminium; material flow; dissimilar
    Abstract
    | Published Article & Citation |
  1. Dimensional Analysis and Dimensionality Reduction: Integrating Statistics and Statistical Learning for Materials Science
    October 1 2008
    K. Rajan, C. Suh, and P.F. Mendez
    Keywords: Dimensional analysis, statistics
    Abstract
    Download PDF Manuscript
  1. Tool Design and Stir Zone Grain Size in AZ31 Friction Stir Spot Welds
    August 20 2009
    N. Sun, Y.H. Yin, A.P. Gerlich, and T.H. North
    Keywords: Friction stir spot welding; Tool geometry; Tool rotational speed; Grain size; AZ31
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  1. Use of scaling laws to estimate grain size and coarsening in the stir zone of friction stir welding
    September 3 2009
    K.E. Tello, P.F. Mendez, and A.P. Gerlich
    Keywords: Friction stir welding, scaling
    Abstract
    Download PDF Manuscript
  2. Advanced scaling techniques for the modeling of materials processing
    April 19 2009
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: scaling, Gas Tungsten Arc Welding (GTAW), Friction stir welding, multiphysics
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  3. Advanced Scaling Techniques for the Modeling of Materials Processing
    July 20 2009
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: scaling, Gas Tungsten Arc Welding (GTAW), Friction stir welding, multiphysics
    Abstract
    Download PDF Manuscript
  4. Constants for hot deformation constitutive models for recent experimental data
    December 22 2009
    K.E. Tello, A.P. Gerlich, and P.F. Mendez
    Keywords: Plastic deformation, Friction stir welding, Zener-Hollomon, Aluminium alloys, Ferrous alloys, Titanium alloys,
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  5. Coupled analysis of heat transfer and temperature dependent plastic deformation in friction stir welding
    July 17-22 2011
    P.F. Mendez, and K.E. Tello
    Keywords: Friction stir welding; high temperature deformation; high-speed deformation; aluminum
    Abstract
    Download PDF Manuscript
  6. Scaling Laws for the Welding Arc, Weld Penetration, and Friction Stir Welding
    June 3 2008
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: Scaling, multiphysics, friction stir welding, weld penetration
    Abstract
    Download PDF Manuscript
  7. Scaling Laws for the Welding Arc, Weld Penetration, and Friction Stir Welding
    June 3 2008
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: Scaling, multiphysics, friction stir welding, weld penetration
    Abstract
    Download PDF Manuscript
  8. Scaling laws to estimate grain size and coarsening in the stir zone
    September 29 2009
    K.E. Tello, P.F. Mendez, and A.P. Gerlich
    Keywords: Friction stir welding, scaling
    Abstract
    Download PDF Manuscript
  9. Scaling of coupled heat transfer and plastic deformation around the pin in friction stir welding
    December 15 2009
    P.F. Mendez, K.E. Tello, and T.J. Lienert
    Keywords: scaling, friction stir welding
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  10. Scaling of Coupled Phenomena in Friction Stir Welding
    January 7 2008
    P.F. Mendez, K.E. Tello, and T.J. Lienert
    Keywords: Friction Stir Welding, Scaling, Shear layer
    Abstract
    Download PDF Manuscript

© 2012 CCWJ. All Rights Reserved.