CCWJ Publications

Sort By: Category | Author | Date Download selected PDFs
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
  1. Use of scaling laws to estimate grain size and coarsening in the stir zone of friction stir welding
    September 3 2009
    K.E. Tello, P.F. Mendez, and A.P. Gerlich
    Keywords: Friction stir welding, scaling
    Abstract
    Download PDF Manuscript
  2. Constants for hot deformation constitutive models for recent experimental data
    December 22 2009
    K.E. Tello, A.P. Gerlich, and P.F. Mendez
    Keywords: Plastic deformation, Friction stir welding, Zener-Hollomon, Aluminium alloys, Ferrous alloys, Titanium alloys,
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  3. Depositing Ni-WC wear resistant coatings with hot-wire assisted GTAW
    June 27 2011
    S.D. Guest, A.P. Gerlich, and P.F. Mendez
    Keywords: GTAW, wear resistance, Tungsten carbide, Ni-WC, oil sands
    Abstract
    Download PDF Manuscript
  4. Effect of microstructure on liquation cracking during AZ91 friction stir spot welding
    November 1 2010
    S. Horie, K. Shinozaki, M. Yamamoto, T.H. North, and A.P. Gerlich
    Keywords: Friction stir spot welding, Mg alloy, Hot cracking, Base material structure
    Abstract
    | Published Article & Citation |
  5. Effect of Welding Parameters on Tungsten Carbide - Metal Matrix Composites Produced by GMAW
    September 28 2010
    L. Choi, W. Tonya, M. Yarmuch, and A.P. Gerlich
    Keywords: wear resistance, tungsten carbides, metal matix composites (MMCs), overlays
    Abstract
    Download PDF Manuscript
  6. Fabrication of an aluminum-carbon nanotube metal matrix composite by accumulative roll-bonding
    September 2 2010
    S. Salimi, H. Izadi, and A.P. Gerlich
    Keywords: Accumulative roll-bonding, aluminum, metal matrix composite, Carbon nanotubes
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  7. Friction stir spot welding of AM60 magnesium alloy to DP600 steel
    March 27 2008
    T. Liyanage, S. Abu-Zahra, A.P. Gerlich, M. Yamamoto, and T. Shibayanagi
    Keywords: friction stir welding, magnesium, aluminum, tungsten, shear, viscous flow
    Abstract
    Download PDF Manuscript
  8. Grain boundary sliding during friction stir spot welding of an aluminum alloy
    October 8 2008
    A.P. Gerlich, and T. Shibayanagi
    Keywords: Friction stir; Spot welding; Grain boundary sliding; Al 2024
    Abstract
    | Published Article & Citation |
  9. Influence of Alloy Chemistry on Microstructure and Properties in NiCrBSi Overlay Coatings Deposited by Plasma Transferred Arc Welding (PTAW)
    July 28 2010
    T. Liyanage, G. Fisher, and A.P. Gerlich
    Keywords: NiCrBSi; Overlay; PTAW; Microstructure; Hardness; EPMA; AES
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  10. Interfacial heating during low-pressure cold-gas dynamic spraying of aluminum coatings
    July 11 2011
    M.P. Dewar, A.G. McDonald, and A.P. Gerlich
    Keywords: cold spray, local heating, Johnson-Cook, plastic flow
    Abstract
    | Published Article & Citation |
  11. Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds
    August 1 2009
    T. Liyanage, J. Kilbourne, A.P. Gerlich, and T.H. North
    Keywords: Friction stir, Spot welding, Dissimilar welding, Aluminium, Magnesium, Steel
    Abstract
    | Published Article & Citation |
  12. Liquid film formation and cracking during friction stir welding
    May 1 2011
    A.P. Gerlich, and T. Shibayanagi
    Keywords: Friction stir, Liquation cracking, Al 2024 alloy, Local melting
    Abstract
    | Published Article & Citation |
  13. Local melting and tool slippage during friction stir spot welding of Al-alloys
    April 18 2007
    A.P. Gerlich, M. Yamamoto, and T.H. North
    Keywords: friction stir, aluminum, EBSD
    Abstract
    | Published Article & Citation |
  14. Material flow and intermixing during dissimilar friction stir welding
    April 1 2008
    A.P. Gerlich, P. Su, M. Yamamoto, and T.H. North
    Keywords: friction stir; intermixing; aluminium; material flow; dissimilar
    Abstract
    | Published Article & Citation |
  15. Melted film formation and cracking in Al 2024 friction stir spot welds
    March 27 2008
    A.P. Gerlich, D.K. Lim, and T. Shibayanagi
    Keywords: friction stir welding, aluminum, local melting, stir zone, cracking
    Abstract
    Download PDF Manuscript
  16. Plastic deformation of nanocrystalline aluminum at high temperatures and strain rate
    November 28 2009
    A.P. Gerlich, L. Yue, P.F. Mendez, and H. Zhang
    Keywords: Nanocrystalline materials; Plastic deformation; High temperature; Molecular dynamics
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  17. Scaling laws to estimate grain size and coarsening in the stir zone
    September 29 2009
    K.E. Tello, P.F. Mendez, and A.P. Gerlich
    Keywords: Friction stir welding, scaling
    Abstract
    Download PDF Manuscript
  18. Selection of Welding Parameter during Friction Stir Spot Welding
    April 1 2009
    A.P. Gerlich, M. Yamamoto, T. Shibayanagi, and T.H. North
    Keywords: Friction stir welding, aluminum, magnesium, spot welding, parameters, cracking
    Abstract
    | Published Article & Citation
  19. Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing
    November 30 2008
    D.K. Lim, T. Shibayanagi, and A.P. Gerlich
    Keywords: Friction stir processing; Carbon nanotubes; Metal matrix composite; Aluminium
    Abstract
    | Published Article & Citation |
  20. Textures in Single-Crystal Aluminum Friction Stir Spot Welds
    January 30 2009
    T. Shibayanagi, A.P. Gerlich, K. Kashihara, and T.H. North
    Keywords: textures, aluminum, friction stir welding, stir zone, EBSD
    Abstract
    | Published Article & Citation |
  21. The Use of Protective Weld Overlays in Oil Sands Mining
    May 11 2011
    G. Fisher, T. Wolfe, M. Yarmuch, A.P. Gerlich, and P.F. Mendez
    Keywords: wear resistance, plasma transferred arc welding (PTAW), gas metal arc welding (GMAW), metal matrix composites (MMCs)
    Abstract
    Download PDF Manuscript
  22. Tool Design and Stir Zone Grain Size in AZ31 Friction Stir Spot Welds
    August 20 2009
    N. Sun, Y.H. Yin, A.P. Gerlich, and T.H. North
    Keywords: Friction stir spot welding; Tool geometry; Tool rotational speed; Grain size; AZ31
    Abstract
    Download PDF Manuscript | Published Article & Citation |

© 2012 CCWJ. All Rights Reserved.