CCWJ Publications

Sort By: Category | Author | Date Download selected PDFs
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
  1. Use of scaling laws to estimate grain size and coarsening in the stir zone of friction stir welding
    September 3 2009
    K.E. Tello, P.F. Mendez, and A.P. Gerlich
    Keywords: Friction stir welding, scaling
    Abstract
    Download PDF Manuscript
  2. Advanced scaling techniques for the modeling of materials processing
    April 19 2009
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: scaling, Gas Tungsten Arc Welding (GTAW), Friction stir welding, multiphysics
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  3. Advanced Scaling Techniques for the Modeling of Materials Processing
    July 20 2009
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: scaling, Gas Tungsten Arc Welding (GTAW), Friction stir welding, multiphysics
    Abstract
    Download PDF Manuscript
  4. Constants for hot deformation constitutive models for recent experimental data
    December 22 2009
    K.E. Tello, A.P. Gerlich, and P.F. Mendez
    Keywords: Plastic deformation, Friction stir welding, Zener-Hollomon, Aluminium alloys, Ferrous alloys, Titanium alloys,
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  5. Coupled analysis of heat transfer and temperature dependent plastic deformation in friction stir welding
    July 17-22 2011
    P.F. Mendez, and K.E. Tello
    Keywords: Friction stir welding; high temperature deformation; high-speed deformation; aluminum
    Abstract
    Download PDF Manuscript
  6. Effect of microstructure on liquation cracking during AZ91 friction stir spot welding
    November 1 2010
    S. Horie, K. Shinozaki, M. Yamamoto, T.H. North, and A.P. Gerlich
    Keywords: Friction stir spot welding, Mg alloy, Hot cracking, Base material structure
    Abstract
    | Published Article & Citation |
  7. Friction stir spot welding of AM60 magnesium alloy to DP600 steel
    March 27 2008
    T. Liyanage, S. Abu-Zahra, A.P. Gerlich, M. Yamamoto, and T. Shibayanagi
    Keywords: friction stir welding, magnesium, aluminum, tungsten, shear, viscous flow
    Abstract
    Download PDF Manuscript
  8. Grain boundary sliding during friction stir spot welding of an aluminum alloy
    October 8 2008
    A.P. Gerlich, and T. Shibayanagi
    Keywords: Friction stir; Spot welding; Grain boundary sliding; Al 2024
    Abstract
    | Published Article & Citation |
  9. Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds
    August 1 2009
    T. Liyanage, J. Kilbourne, A.P. Gerlich, and T.H. North
    Keywords: Friction stir, Spot welding, Dissimilar welding, Aluminium, Magnesium, Steel
    Abstract
    | Published Article & Citation |
  10. Liquid film formation and cracking during friction stir welding
    May 1 2011
    A.P. Gerlich, and T. Shibayanagi
    Keywords: Friction stir, Liquation cracking, Al 2024 alloy, Local melting
    Abstract
    | Published Article & Citation |
  11. Local melting and tool slippage during friction stir spot welding of Al-alloys
    April 18 2007
    A.P. Gerlich, M. Yamamoto, and T.H. North
    Keywords: friction stir, aluminum, EBSD
    Abstract
    | Published Article & Citation |
  12. Material flow and intermixing during dissimilar friction stir welding
    April 1 2008
    A.P. Gerlich, P. Su, M. Yamamoto, and T.H. North
    Keywords: friction stir; intermixing; aluminium; material flow; dissimilar
    Abstract
    | Published Article & Citation |
  13. Melted film formation and cracking in Al 2024 friction stir spot welds
    March 27 2008
    A.P. Gerlich, D.K. Lim, and T. Shibayanagi
    Keywords: friction stir welding, aluminum, local melting, stir zone, cracking
    Abstract
    Download PDF Manuscript
  14. Modeling Friction Stir Welding through Advanced Scaling Techniques
    July 24 2006
    J.A. Roubidoux, and P.F. Mendez
    Keywords: Scaling, Friction stir welding, thermal analysis, mechanical analysis
    Abstract
    Download PDF Manuscript
  15. New trends in welding in the aeronautic industry
    November 19 2002
    P.F. Mendez, and T.W. Eagar
    Keywords: aeronautics, friction stir welding (FSW), variable polarity plasma arc (VPPA)
    Abstract
    Download PDF Manuscript
  16. New trends in welding in the aeronautic industry
    November 19 2002
    P.F. Mendez, and T.W. Eagar
    Keywords: aeronautics, friction stir welding (FSW), variable polarity plasma arc (VPPA)
    Abstract
    Download PDF Manuscript | Published Article & Citation
  17. Scaling laws to estimate grain size and coarsening in the stir zone
    September 29 2009
    K.E. Tello, P.F. Mendez, and A.P. Gerlich
    Keywords: Friction stir welding, scaling
    Abstract
    Download PDF Manuscript
  18. Scaling of coupled heat transfer and plastic deformation around the pin in friction stir welding
    December 15 2009
    P.F. Mendez, K.E. Tello, and T.J. Lienert
    Keywords: scaling, friction stir welding
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  19. Scaling of Coupled Phenomena in Friction Stir Welding
    January 7 2008
    P.F. Mendez, K.E. Tello, and T.J. Lienert
    Keywords: Friction Stir Welding, Scaling, Shear layer
    Abstract
    Download PDF Manuscript
  20. Selection of Welding Parameter during Friction Stir Spot Welding
    April 1 2009
    A.P. Gerlich, M. Yamamoto, T. Shibayanagi, and T.H. North
    Keywords: Friction stir welding, aluminum, magnesium, spot welding, parameters, cracking
    Abstract
    | Published Article & Citation
  21. Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing
    November 30 2008
    D.K. Lim, T. Shibayanagi, and A.P. Gerlich
    Keywords: Friction stir processing; Carbon nanotubes; Metal matrix composite; Aluminium
    Abstract
    | Published Article & Citation |
  22. Textures in Single-Crystal Aluminum Friction Stir Spot Welds
    January 30 2009
    T. Shibayanagi, A.P. Gerlich, K. Kashihara, and T.H. North
    Keywords: textures, aluminum, friction stir welding, stir zone, EBSD
    Abstract
    | Published Article & Citation |
  23. Tool Design and Stir Zone Grain Size in AZ31 Friction Stir Spot Welds
    August 20 2009
    N. Sun, Y.H. Yin, A.P. Gerlich, and T.H. North
    Keywords: Friction stir spot welding; Tool geometry; Tool rotational speed; Grain size; AZ31
    Abstract
    Download PDF Manuscript | Published Article & Citation |

© 2012 CCWJ. All Rights Reserved.