CCWJ Publications

Sort By: Category | Author | Date Download selected PDFs
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
  1. A new method for the design of welding consumables
    June 16 2009
    D.S. Tordonato, J.C. Madeni, S. Babu, S. Liu, and P.F. Mendez
    Keywords: Button Melt, Consumable Design, Consumable Composition, Microstructure, Mathematical Mode
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  2. Use of scaling laws to estimate grain size and coarsening in the stir zone of friction stir welding
    September 3 2009
    K.E. Tello, P.F. Mendez, and A.P. Gerlich
    Keywords: Friction stir welding, scaling
    Abstract
    Download PDF Manuscript
  3. Advanced scaling techniques for the modeling of materials processing
    April 19 2009
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: scaling, Gas Tungsten Arc Welding (GTAW), Friction stir welding, multiphysics
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  4. Advanced Scaling Techniques for the Modeling of Materials Processing
    July 20 2009
    K.E. Tello, U. Duman, and P.F. Mendez
    Keywords: scaling, Gas Tungsten Arc Welding (GTAW), Friction stir welding, multiphysics
    Abstract
    Download PDF Manuscript
  5. Characteristic Values in the Scaling of Differential Equations in Engineering
    October 22 2009
    P.F. Mendez
    Keywords: Scaling, Differential Equations
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  6. Constants for hot deformation constitutive models for recent experimental data
    December 22 2009
    K.E. Tello, A.P. Gerlich, and P.F. Mendez
    Keywords: Plastic deformation, Friction stir welding, Zener-Hollomon, Aluminium alloys, Ferrous alloys, Titanium alloys,
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  7. Cooling curve analysis to determine phase fractions in solid-state precipitation reactions
    June 2 2009
    J.W. Gibbs, M.J. Kaufman, R.E. Hackenberg, and P.F. Mendez
    Keywords: Cooling curve, phase transformations
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  8. Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds
    August 1 2009
    T. Liyanage, J. Kilbourne, A.P. Gerlich, and T.H. North
    Keywords: Friction stir, Spot welding, Dissimilar welding, Aluminium, Magnesium, Steel
    Abstract
    | Published Article & Citation |
  9. Plastic deformation of nanocrystalline aluminum at high temperatures and strain rate
    November 28 2009
    A.P. Gerlich, L. Yue, P.F. Mendez, and H. Zhang
    Keywords: Nanocrystalline materials; Plastic deformation; High temperature; Molecular dynamics
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  10. Scaling laws to estimate grain size and coarsening in the stir zone
    September 29 2009
    K.E. Tello, P.F. Mendez, and A.P. Gerlich
    Keywords: Friction stir welding, scaling
    Abstract
    Download PDF Manuscript
  11. Scaling of coupled heat transfer and plastic deformation around the pin in friction stir welding
    December 15 2009
    P.F. Mendez, K.E. Tello, and T.J. Lienert
    Keywords: scaling, friction stir welding
    Abstract
    Download PDF Manuscript | Published Article & Citation |
  12. Selection of Welding Parameter during Friction Stir Spot Welding
    April 1 2009
    A.P. Gerlich, M. Yamamoto, T. Shibayanagi, and T.H. North
    Keywords: Friction stir welding, aluminum, magnesium, spot welding, parameters, cracking
    Abstract
    | Published Article & Citation
  13. Textures in Single-Crystal Aluminum Friction Stir Spot Welds
    January 30 2009
    T. Shibayanagi, A.P. Gerlich, K. Kashihara, and T.H. North
    Keywords: textures, aluminum, friction stir welding, stir zone, EBSD
    Abstract
    | Published Article & Citation |
  14. Tool Design and Stir Zone Grain Size in AZ31 Friction Stir Spot Welds
    August 20 2009
    N. Sun, Y.H. Yin, A.P. Gerlich, and T.H. North
    Keywords: Friction stir spot welding; Tool geometry; Tool rotational speed; Grain size; AZ31
    Abstract
    Download PDF Manuscript | Published Article & Citation |

© 2012 CCWJ. All Rights Reserved.