Publications
Students’ names are capitalized and presenters' names are underlined
Published
J66.
AL HABIB N., Ben-Awuah E., Askari-Nasab H. (2023), “Short-term Planning
of Open Pit Mines with Semi-Mobile IPCC: A Shovel Allocation Model”,
International Journal of Mining, Reclamation and Environment, © Taylor &
Francis Group, London, submitted on July 4, 2023.
J65.JELVEZ
E., Ortiz J., Morales Varela N., Askari-Nasab H., and Nelis G. (2023) ”A
Multi-Stage Methodology for Long-Term Open-Pit Mine Production Planning
under Ore Grade Uncertainty”, Mathematics, @MDPI, 11(18), 3907,
received: 21 July 2023, published: 14 September 2023.
J64.GONG H., Moradi Afrapoli, A., and
Askari-Nasab, H. (2023), “Integrated Simulation and Optimization
Framework for Quantitative Analysis of Near-Face Stockpile Mining”,
Simulation Modelling Practice and Theory, ©Elsevier, Amsterdam,
Netherlands, Vol 128 (2023) 102794, pp. 1-17, received 24 April 2023,
revised 16 June 2023, accepted 24 June 2023, available online 25 June
2023, /doi.org/10.1080/17480930.2022.2160891.
J63.AL HABIB N., Ben-Awuah E., Askari-Nasab H.
(2023), “Short-Term Planning of Open Pit Mines with Semi-mobile In-Pit
Crusher”, Mining Engineering ©SME, Littleton, CO, USA, April 2023, pp.
14-22.
J62.Moradi Afrapoli A. and Askari-Nasab H.
(2023). “Chapter 13: Fleet Management Systems”, SME Surface Mining
Handbook, Editor: Peter Darling, the Society of Mining, Metallurgy, and
Exploration, ©SME, Littleton, CO, February, 2023, P. 279-287.
J61.AL HABIB N., Ben-Awuah E., Askari-Nasab H.
(2023), “Review of Recent Developments in Short-Term Mine Planning and
IPCC With a Research Agenda”, Mining Technology, Transactions of the
Institutions of Mining and Metallurgy: Section A. ©Taylor & Francis
Group, London, UK, pp. 1-24, received 19 Nov 2022, accepted 22 May 2023,
published online: 08 Jun 2023. DOI: 10.1080/25726668.2023.2218170.
J60.Mirzaei-Nasirabad H., MOHTASHAM M.,
Askari-Nasab H., Alizadeh B, (2023), “Optimization Model for the
Real-Time Truck Dispatching Problem in Open-Pit Mining Operations”
Optimization and Engineering, @Springer, pp. 1-25. received February
2022, published 28 February, 2023.
https://doi.org/10.1007/s11081-022-09780-x.
J59.GONG H., Moradi Afrapoli, A., and
Askari-Nasab, H. (2023), “Near-Face Stockpile Open Pit Mining: A Method
to Enhance NPV and Quality of the Plant Throughput”, International
Journal of Mining, Reclamation and Environment, © Taylor & Francis
Group, London, UK, Vol. 37, No. 3, pp. 200-215, submitted on August 3,
2022, published online 28 December 2022.
/doi.org/10.1080/17480930.2022.2160891.
J58. TABESH, M., AFRAPOLI M., and
Askari-Nasab, H. (2023), “A Two-Stage Simultaneous Optimization of NPV
and Throughput in Production Planning of Open Pit Mines”, Resources
Policy, ©Elsevier, Amsterdam, Netherlands, Vol. 80, No., 2 pages,
submitted on August 4, 2022, available online 7 December 2022.
10.1016/j.resourpol.2022.103167.
J57. PIRMORADIAN H., Monjezi M.,
Askari-Nasab H., Nikbakhsh E., Mousavi Nogholi, A. (2022), “Development
of a local search algorithm for solving allocation and dispatching
problem of transportation fleet in open pit mines”, Journal of Mineral
Resources Engineering, accepted on January 26, 2022.
J56. MORADI AFRAPOLI, A., UPADHYAY,
S. P., and Askari-Nasab, H. (2022), "A Nested Multiple Objective
Optimization Algorithm for Managing Production Fleets in Surface Mines",
Engineering Optimization, ©Taylor & Francis Group, London, UK, submitted
on March 26, 2021, accepted November 26, 2022.
https://doi.org/10.1080/0305215X.2022.2153840
J55. MOHTASHAM M., Mirzaei-Nasirabad H.,
Askari-Nasab H., and Alizadeh B. (2022), “Multi-Stage Optimization
Framework for The Real-Time Truck Decision Problem in Open-Pit Mines: A
Case Study on Sungun Copper Mine”, International Journal of Mining,
Reclamation and Environment, © Taylor & Francis Group, London, UK, Vol.
36, No. 7, pp. 461-491, received Sep. 28, 2021, accepted Apr. 15, 2022,
published online: May 5, 2022, doi.org/10.1080/17480930.2022.2067709
J54. MORADI AFRAPOLI, A. and Askari-Nasab,
H. (2022), “Advanced Analytics for Surface Extraction” in Advanced
Analytics in Mining Engineering, ©Springer, Nature Switzerland AG, pp.
181-203, Pages 747, Feb. 2022, doi.org/10.1007/978-3-030-91589-6.
J53. UPADHYAY, S. P., Doucette J., and
Askari-Nasab, H. (2022). ”Short Term Production Scheduling in Open Pit
Mines with Shovel Allocations over Continuous Time Frames”,
International Journal of Mining and Mineral Engineering, © Inderscience
Enterprises Ltd, Genève, Switzerland, Vol. 12, No. 4, pp. 292-308,
submitted on July 2, 2018, published online: February 28, 2022.
J52. YEGANEJOU, M., BADIOZAMANI, M.M.,
MORADI AFRAPOLI, A., and Askari-Nasab, H. (2021). “Integration of
Simulation and Dispatch Modeling to Predict Fleet Productivity: An Open
Pit Mining Case”, Mining Technology, Transactions of the Institutions
of Mining and Metallurgy: Section A., ©Taylor & Francis Group, London,
UK, Vol. 131, No. 2, pp.67-79, submitted on May 13, 2021, accepted with revisions due on Oct 9,
2021.
J51. MORADI AFRAPOLI, A., UPADHYAY, S. P.,
and Askari-Nasab, H. (2021). “Truck Dispatching in Surface Mines –
Application of Fuzzy Linear Programming”, The Journal of the South
African Institute of Mining and Metallurgy, © SAIMM, Johannesburg, South
Africa, pp. 1-21, Vol. 121, No. 9, pp. 505-512. DOI:
10.17159/2411-9717/522/2021. (submitted on October 23, 2018, accepted July 28, 2021.)
J50.
MOHTASHAM M., Mirzaei-Nasirabad H.,
Askari-Nasab H., and Alizadeh B. (2021). “A Multi-Objective Model for
Fleet Allocation Schedule in Open-Pit Mines Considering the Impact of
Prioritising Objectives on Transportation System Performance”,
International Journal of Mining, Reclamation and Environment, © Taylor &
Francis Group, London, UK, Vol. 35, No. 10, pp.709-727, DOI: 10.1080/17480930.2021.1949861. Received
19 Mar 2021, Accepted 06 Jun 2021, Published online: 02 Aug 2021.
J49.
MOHTASHAM M., Mirzaei-Nasirabad H.,
Askari-Nasab H., and Alizadeh B. (2021). “Truck fleet size selection in
open-pit mines based on the match factor using a MINLP model”, Mining
Technology, Transactions of the Institutions of Mining and Metallurgy:
Section A. ©Taylor & Francis Group, London, UK, Vol. 130, No.3, pp.
159-175, DOI: 10.1080/25726668.2021.1919374.
J48. MAREMI A., Ben-Awuah, E., and
Askari-Nasab, H. (2021). “Multi-objective Mathematical Programming
Framework for Integrated Oil Sands Mine Planning and Tailings Disposal
Optimization”, Mining, Metallurgy & Exploration, © Society for Mining,
Metallurgy & Exploration Inc., Springer, Vol. 38, pp. 1355-1374, DOI:
10.1007/s42461-021-00418-7.
J47.
PARAVARZAR, S., Askari-Nasab, H.,
Pourrahimian, Y., and Emery X. (2021). “Simultaneous Multi-Sector Block
Cave Mine Production Scheduling Considering Operational Uncertainties”,
Mining Technology, Transactions of the Institutions of Mining and
Metallurgy: Section A. ©Taylor & Francis Group, London, UK, Vol.130, No.
1, pp. 36-51, DOI: 10.1080/25726668.2021.1872261.
J46.
UPADHYAY, S. P., TABESH, M., M.,
BADIOZAMANI, M.M., MORADI AFRAPOLI, A., and Askari-Nasab H. (2021). “A
Simulation-based Algorithm for Solving Surface Mines’ Equipment
Selection and Sizing Problem under Uncertainty”, Canadian Institute of
Mining, Metallurgy and Petroleum Journal (CIM), ©Taylor & Francis Group,
London, UK, Vol. 12, No. 1, pp. 36-46, DOI:
10.1080/19236026.2021.1872995.
J45.
PARAVARZAR, S., Pourrahimian, Y.,
Askari-Nasab, H., and Emery X. (2021). “Short-Term Underground Mine
Planning: A Review”, International Journal of Mining and Mineral
Engineering, ©Inderscience Enterprises Ltd, Genève, Switzerland, Vol.12,
No.1, pp. 1-33. DOI: 10.1504/IJMME.2021.114902.
J44. PARAVARZAR, S., Askari-Nasab, H.,
Pourrahimian, Y., and Emery X. (2021). “Operational Mine Planning in
Block Cave Mining: A Simulation-Optimisation Approach”, International
Journal of Mining, Reclamation and Environment, © Taylor & Francis
Group, London, UK, , Vol. 35, No. 3, pp. 199-218, DOI:
10.1080/17480930.2020.1804039.
J43. MORADI AFRAPOLI, A., TABESH, M., and
Askari-Nasab, H. (2020). “A Stochastic Integrated Simulation and MILP
Optimization Framework for Truck Dispatching Problem in Surface Mines”,
International Journal of Mining and Mineral Engineering, ©Inderscience
Enterprises Ltd, Genève, Switzerland, Vol. 11, No. 4, pp. pp. 257-284,
DOI: 10.1504/IJMME.2020.111929.
J42.
OPPONG AFUM, B., Ben-Awuah, E., and
Askari-Nasab, H. (2020). “A Mixed Integer Linear Programming Framework
for Optimizing the Extraction Strategy of Open Pit and Underground
Mining Transitions”, International Journal of Mining, Reclamation and
Environment, ©Taylor & Francis Group, London, UK, Vol. 34, No. 10, pp.
700-724, DOI: 10.1080/17480930.2019.1701968.
J41.
JELVEZ, E., Morales, N., and
Askari-Nasab, H. (2020). “A New Model for Automated Pushback Selection”.
Computers and Operations Research, © Elsevier, Netherlands, Vol
115 (2020) 104456. doi.org/10.1016/j.cor.2018.04.015
J40.
BADIOZAMANI, M.M., Ben-Awuah E., and
Askari-Nasab, H. (2019). "Mixed Integer Linear Programming for Oil Sands
Production Planning and Tailings Management", Journal of Environmental
Informatics, ©International Society for Environmental Information
Sciences, Regina, Canada, Vol 33, 2, pp. 96-104.
doi:10.3808/jei.201900405
J39.
TABESH, M. and Askari-Nasab, H. (2019).
“Clustering Mining Blocks in Presence of Geological Uncertainty”,
Transactions of the Institution of Mining and Metallurgy: Section A,
Mining industry, Mining Technology ©Taylor and Francis,
United Kingdom, Vol. 128, 3, pp. 162-176.
doi.org/10.1080/25726668.2019.1596425.
J38.
MORADI AFRAPOLI, A., TABESH, M.,
Askari-Nasab, H. (2019). “A Multiple Objective Transportation Problem
Approach to Dynamic Truck Dispatching in Surface Mines”, European
Journal of Operational Research, ©Elsevier, Netherlands, Vol 276, 1, pp.
331-342.
J37.
MORADI AFRAPOLI, A., TABESH, M., &
Askari-Nasab, H. (2019). “A Stochastic Hybrid Simulation-Optimization
Approach towards Haul Fleet Sizing in Surface Mines”. Transactions of
the Institution of Mining and Metallurgy: Section A, Mining industry,
Mining Technology ©Maney Publishing, Leeds, LS3 1AB, United Kingdom,
Vol. 128, 1, pp.9-20. doi.org/10.1080/25726668.2018.1473314.
J36.
GORIS CERVANTES, E., UPADHYAY, S. P.,
and Askari-Nasab, H. (2019). “Improvements to Production Planning in Oil
Sands Mining Through Analysis and Simulation of Truck Cycle Times”,
Canadian Institute of Mining, Metallurgy and Petroleum Journal, ©CIM,
Montreal, Canada, Vol. 10, 1, pp. 1-14.
doi.org/10.15834/cimj.2019.1.
J35.
MORADI AFRAPOLI, A. and Askari-Nasab, H.
(2019). “Mining Fleet Management Systems: A Review of Models and
Algorithms”, International Journal of Mining, Reclamation and
Environment, © Taylor & Francis Group, London, UK, Vol. 33, 1, pp.
42-60, DOI: 10.1080/17480930.2017.1336607.
J34.
UPADHYAY, S. P. and Askari-Nasab, H. (2019).
“Dynamic Shovel Allocation Approach to Short-Term Production Planning in
Open-Pit Mines”, International Journal of Mining, Reclamation and
Environment, © Taylor & Francis Group, London, UK, Vol. 33, 1, pp. 1-20,
10.1080/17480930.2017.1315524.
J33.
MORADI AFRAPOLI, A., UPADHYAY, S. P., and
Askari-Nasab, H. (2018). “A Fuzzy Logic Approach towards Truck
Dispatching Problem in Surface Mines”. International Journal of
Mechanical and Production Engineering, ©Transstellar Journal
Publications and Research Consultancy Private Limited, Vol. 6, 12, pp.
79-84.
J32.
BEN-AWUAH, E., Askari-Nasab, H., Maremi, A.,
and Seyed Hosseini, N. (2018). “Implementation of A Goal Programming
Framework for Production and Dyke Material Planning”, International
Journal of Mining, Reclamation and Environment, © Taylor & Francis
Group, London, UK, Vol. 32, 8, pp. 536-563, DOI:
10.1080/17480930.2017.1331082.
J31.
UPADHYAY, S. P. and Askari-Nasab, H. (2017).
“Simulation Optimization Approach for Uncertainty-Based Short-Term
Planning in Open Pit Mines”, International Journal of Mining Science and
Technology, © Elsevier, Netherlands, Vol. 28, 2, pp. 153-166, DOI:
10.1016/j.ijmst.2017.12.003.
J30.
UPADHYAY, S. P. and Askari-Nasab, H., (2016), " Truck
Shovel Allocation Optimization: A Goal Programming Approach ",
Transactions of the Institution of Mining and Metallurgy: Section A,
Mining industry, Mining Technology © Maney Publishing, Leeds, LS3 1AB,
United Kingdom, Vol. 125, 2, pp. 82-92.
doi.org/10.1179/1743286315Y.0000000024.
J29. BADIOZAMANI, M.M. and Askari-Nasab,
H., (2016), "Integrated Mine and Tailings Planning: A Mixed Integer
Linear Programming Model", International Journal of Mining, Reclamation
and Environment, © Taylor & Francis Group, London, UK Vol. 30, 4, pp.
319-346.
J28.
BEN-AWUAH E., Elkington, T.,
Askari-Nasab, H., and Blanchfield, F., (2015), "Simultaneous Production
Scheduling and Waste Management Optimization for an Oil Sands
Application", Journal of Environmental Informatics,© International
Society for Environmental Information Sciences, Regina, Canada, Vol.
26, 2, pp. 80-90. doi:10.3808/jei.201500305.
J27. TORKAMANI, E. and Askari-Nasab, H. (2015). “A Linkage of
Truck-and-Shovel Operations to Short-Term Mine Plans using
Discrete-Event Simulation”, International Journal of Mining and Mineral
Engineering, © Inderscience Enterprises Ltd, Geneve, Switzerland, Vol.
6. No. 2, pp. 97-118.
J26.
TABESH, M., MIETH, C., and Askari-Nasab, H.,
(2014). “A Multi-Step Approach To Long-Term Open-Pit Production
Planning”, International Journal of Mining and Mineral Engineering, ©
Inderscience Enterprises Ltd, Geneve, Switzerland, Vol. 5, 5, pp.
273-298. doi.org/10.1504/IJMME.2014.066577.
J25.
KOUSHAVAND B., Askari-Nasab H., and Deutsch C., (2014).
“Mixed Integer Linear Programming Model for Long-term Mine Planning in
the Presence of Grade Uncertainty and Stockpile”, International Journal
of Mining Science and Technology, © Elsevier, Netherlands, Vol. 24, 4,
pp. 451-459.
J24.
POURRAHIMIAN, Y., Askari-Nasab, H.,
and Tannant, D. (2014). “An Application of Mathematical Programming to
Determine the Best Height of Draw during the Block-Cave Sequence
Optimization” Transactions of the Institution of Mining and Metallurgy:
Section A, Mining industry, © Maney Publishing, Leeds, LS3 1AB, United
Kingdom, Vol. 123, 3, pp. 162-172.
doi.org/10.1179/1743286314Y.0000000061.
J23.
BADIOZAMANI, M.M. and Askari-Nasab, H.
(2014). “Integration of Reclamation and Tailings Management in Oil Sands
Surface Mine Planning”, Environmental Modelling & Software, © Langford
Lane, Kidlington, Oxford, OX5 1GB, United Kingdom, Vol. 51, pp. 45-58,
dx.doi.org/10.1016/j.envsoft.2013.09.026
J22.
TABESH, M. and Askari-Nasab, H. (2013). “Automatic
Creation of Mining Polygons using Hierarchical Clustering Techniques”,
Journal of Mining Science, © Pleiades Publishing, Vol. 49, No, 3, pp.
426-439.
J21. POURRAHIMIAN, Y., Askari-Nasab, H., and
Tannant, D. (2013). “A Multi-Step Approach for Block Cave Production
Scheduling Optimisation”, International Journal of Mining Science and
Technology, © Elsevier, Netherlands, Vol. 23, No. 5, pp. 739-750,
dx.doi.org/10.1016/j.ijmst.2013.08.019.
J20.
BEN-AWUAH, E.
and Askari-Nasab H. (2013), “Incorporating Waste Management into Oil
Sands Long Term Production Planning”, Transactions of the Institution of
Mining and Metallurgy. Section A, Mining industry, © Maney Publishing,
Leeds, LS3 1AB, United Kingdom, Vol. 122, No. 1, pp. 33-45, DOI:
10.1179/1743286312Y.0000000031.
J19.
KALANTARI, S., BEN-AWUAH, E., and
Askari-Nasab, H., (2013), "Towards an Integrated Oil Sands Mine Plan and
Composite Tailings Plan", International Journal of Mining, Reclamation
and Environment, © Taylor & Francis Group, London, UK, Vol. 27, No. 2,
pp. 103-126. DOI: 10.1080/17480930.2012.661547.
J18. EIVAZY, H., and
Askari-Nasab, H., (2012) “A Hierarchical Open-Pit Mine Production
Scheduling Optimization Model”, International Journal of Mining and
Mineral Engineering, © Inderscience Enterprises Ltd, Geneve,
Switzerland, Vol. 4, No. 2, pp. 89-115.
doi.org/10.1504/IJMME.2012.052436
J17.
BEN-AWUAH, E., Askari-Nasab, H. and
Awuah-Offei, K., (2012) “Production Scheduling and Waste Disposal
Planning for Oil Sands Mining using Goal Programming”, Journal of
Environmental Informatics, © International Society for Environmental
Information Sciences, Regina, Canada, Vol. 20, No. 1, pp. 20-33.
J16.
POURRAHIMIAN, Y., Askari-Nasab, H., and
Tannant D., (2012). “Mixed Integer Linear Programming Formulation for
Block Cave Sequence Optimization”, International Journal of Mining and
Mineral Engineering, © Inderscience Enterprises Ltd, Geneve,
Switzerland, Vol. 4, No. 1, pp. 26-49, DOI: 10.1504/IJMME.2012.047998.
J15. EIVAZY H. and Askari-Nasab H. (2012), “A Mixed
Integer Linear Programming Model for Short-Term Open Pit Production
Scheduling”, Transactions of the Institution of Mining and Metallurgy.
Section A, Mining industry, © Maney Publishing, Leeds, LS3 1AB, United
Kingdom, Vol. 121, No. 2, pp. 97-108, DOI:
10.1179/1743286312y.0000000006.
J14.
TABESH, M. and
Askari-Nasab, H., (2011), "Two-stage clustering algorithm for block
aggregation in open pit mines", Transactions of the Institutions of
Mining and Metallurgy, Section A: Mining Technology, © Maney Publishing,
Leeds, LS3 1AB, United Kingdom, Vol. 120, No. 3, pp. 158-169. DOI:
10.1179/1743286311y.0000000009.
J13.
Awuah-Offei, K., BISMARK, O., and
Askari-Nasab, H., (2011), "Modeling Truck-Shovel Energy Efficiency under
Uncertainty", Transactions of the Society of Mining, Metallurgy, and
Engineering, ©SME, Littleton, CO 80127, USA, Vol. 330, 2011
Transactions, pp. 573-584.
J12. BEN-AWUAH, E. and Askari-Nasab, H., (2011), "Oil sands mine planning and
waste management using mixed integer goal programming", International
Journal of Mining, Reclamation and Environment, © Taylor & Francis Group,
London, UK, Vol. 25, No. 3, pp. 226-247. DOI: 10.1080/17480930.2010.549656.
J11. Awuah-Offei, K. and Askari-Nasab, H.,
(2011), "Aggregate Cost Minimization in Hot-Mix Asphalt Design", Journal of
Materials in Civil Engineering, ©ASCE, Vol. 23, 5, pp. 554-561. DOI:
10.1061/(ASCE)MT.1943-5533.0000211.
J10. Askari-Nasab, H., POURRAHIMIAN, Y.,
BEN-AWUAH, E., and KALANTARI, S., (2011), "Mixed integer linear programming
formulations for open pit production scheduling", Journal of Mining Science,
© Springer, New York, NY 10013-1578, United States, Vol. 47, No. 3, pp.
338-359. DOI: 10.1134/s1062739147030117.
J9.
Askari-Nasab, H., Awuah-Offei, K., and
EIVAZY, H., (2010), "Large-Scale Open Pit Production Scheduling Using
Mixed Integer Linear Programming", International Journal of Mining and
Mineral Engineering, © Inderscience Enterprises Ltd, Vol. 2, No. 3, pp.
185-214. DOI: 10.1504/IJMME.2010.037624.
J8.
BEN-AWUAH, E., S. KALANTARI, Y. POURRAHIMIAN,
and H. Askari-Nasab (2010) “Hierarchical Mine Production Scheduling using
Discrete-Event Simulation”, International Journal of Mining and Mineral
Engineering, © Inderscience Enterprises Ltd, Vol. 2, No. 2, pp. 137-158.
DOI: 10.1504/IJMME.2010.035314.
J7. Awuah-Offei, K.,
Checkel, D., and Askari-Nasab, H., (2009), "Evaluation of Belt Conveyor And
Truck Haulage Systems In An Open Pit Mine Using Life Cycle Assessment", CIM
Bulletin Technical Papers, © The Canadian Institute of Mining, Metallurgy
and Petroleum, Quebec, Vol. 102, Nº 1115, Paper 8, pp. 1-6.
J6.
Awuah-Offei, K.
and Askari-Nasab, H., (2009), "Asphalt Mix Optimization for Efficient Plant
Management", Transportation Research Record: Journal of the Transportation
Research Board, © Transportation Research Board, Washington, DC, USA, Vol.
2098, No. 2009, pp. 105-122. DOI: 10.3141/2098-11.
J5.
Askari-Nasab, H. and
Awuah-Offei, K., (2009), "Open Pit Optimisation using Discounted Economic
Block Values", Transactions of the Institution of Mining and Metallurgy.
Section A, Mining industry, © Maney Publishing, Leeds, LS3 1AB, United
Kingdom, Vol. 118, No. 1, pp. 1-12. DOI: 10.1179/037178409X12450752943243.
J4.
Awuah-Offei, K.,
Frimpong, S., and Askari-Nasab, H., (2009), "Formation Excavation Resistance
Modeling for Shovel Dippers", International Journal of Mining and Mineral
Engineering, © Inderscience Publishers, Vol. 1, No. 2, pp. 127-146.
DOI:10.1504/IJMME.2009.023131.
J3.
Askari-Nasab, H.
and Awuah-Offei, K., (2008), "An Agent Based Framework for Open Pit Mine
Planning", CIM Bulletin Technical Papers, February 2008 to January 2009, ©
The Canadian Institute of Mining, Metallurgy and Petroleum, Montreal,
Quebec, Vol. 110, No. Nº 1112, Dec. 2008/Jan. 2009, pp. 145-154.
J2.
Askari-Nasab,
H., Frimpong, S., and Szymanksi, J., (2008), "Investigating the Continuous
Time Open Pit Dynamics", The Journal of the South African Institute of
Mining and Metallurgy, © SAIMM, Johannesburg, South Africa, Vol. 108, No. 2,
February, pp. 61-73.
J1.
Askari-Nasab, H.,
Frimpong, S., and Szymanksi, J., (2007), "Modeling Open Pit Dynamics using
Discrete Simulation", International Journal of Mining, Reclamation and
Environment, © Taylor & Francis Group, London, UK, Vol. 21, No. 1, March
2007, pp. 35- 49. DOI: 10.1080/17480930600720206.
Top of the page
C70 Askari-Nasab H., PARAVARZAR S., GONG H.
(2023), "A Simulation-Based Quantitative Analysis of Near Face Stockpile
Mining Method", in Proceedings of Geomin-Mine Planning – 8th
International Conference on Mine Planning, ©Gecamin, Santiago, Chile,
July 12-14, 2023.
C69 AL HABIB N., KAMRANI A. and Askari-Nasab H.
(2023), " Short-term planning of open pit mines with semi-mobile IPCC or
traditional truck haulage", in Proceedings of Geomin-Mine Planning – 8th
International Conference on Mine Planning, ©Gecamin, Santiago, Chile,
July 12-14, 2023.
C68 KAMRANI A.,
Askari-Nasab H. (2023), “A Two-step Model to Optimize the Semi-mobile
In-pit Crusher Locations and the Mine Schedule”, presented at APCOM 2023
Intelligent Mining: Innovation, Vision, and Value, Rapid City, South
Dakota, USA, June 25-28, 2023, pp. 1-19
C67 AL HABIB N.,
Askari-Nasab H., Ben-Awuah E. (2023), “A General Short-Term Planning
Model of Open Pit Mines with Semi-Mobile In-Pit Crusher or Traditional
Truck-Shovel Haulage”, presented at APCOM 2023 Intelligent Mining:
Innovation, Vision, and Value, Rapid City, South Dakota, USA, June
25-28, 2023, pp. 1-19.
C66 Askari-Nasab H.,
KAMRANI A., Pourrahimian Y., and Al Habib N. (2023), “Long-Term
Mine Planning Optimization for IPCC-Based Open-Pit Mining Operations”,
presented at 26th World Mining Congress 2023, Brisbane, Australia from
26 - 29 June 2023.
C65 Askari-Nasab H.,
PARAVARZAR S., GONG H. (2023), “Data-Driven Short-Term Mine Planning
with Operational Uncertainty”. presented at the CIM Convention & Expo,
Session: Mine Operations-Mine Data Enhancements CIM MTL23, Montreal,
Quebec, Canada, April 30- May 3, 2023.
C64 AL HABIB N.,
Ben-Awuah E., Askari-Nasab H. (2023), “Short-Term Planning of Open Pit
Mines with Semi-mobile In-Pit Crusher”, presented at SME Annual
Conference, Preprint 23-010, Feb. 26 - Mar. 01, 2023, Denver, CO, USA,
pp. 1-6.
C63 Askri-Nasab H.
(2022), Applications of Design of Experiments in Mine Planning using
GEOVIA’s Tools, GEOVIA Connect 22x, October 17-18, 2022, Virtual Event.
C62 Askri-Nasab H., University of Alberta, Mining
Engineering Program, Reunión Regional De La Sociedad De Profesores De
Minería, Society of Mining Professors (SOMP), June 22-24, 2022, Lima,
Peru.
C61 KAMRANI A., MORADI-AFRAPOLI A., and
Askari-Nasab H., Minimizing the truck-shovel fleet through finding
best locations for the in-pit crusher and conveyor during the mine
life , GEOMIN-Mine Planning 2021, June 9-11, 2021, Santiago, Chile.
C60 Al-HABIB N., MORADI-AFRAPOLI A., and
Askari-Nasab H., Short-term planning of open pit mines with semi-mobile
in-pit crusher, GEOMIN-Mine Planning 2021, June 9-11, 2021, Santiago,
Chile.
C59. Askari-Nasab, H., Canada-Brazil Trade
Mission: Corporate Training in the Mining Sector- University of Alberta,
SIMEXMIN 2021 - IX SIMPÓSIO BRASILEIRO DE EXPLORAÇÃO MINERAL, August
9-12.
C58. Askari-Nasab, H. and Pourrahimian Y. (2020).
“Secuenciamiento de producción diaria en el minado Block Caving,
considerando la incertidumbre operativa", Instituto de Ingenieros de
Minas del Peru, November 25, 2020.
C57. UPADHYAY, S; TABESH, M; BADIOZAMANI, M;
Askari-Nasab, H. (2019). “A Simulation Model for Estimation of Mine
Haulage Fleet Productivity”. Proceedings of International Symposium on
Mine Planning & Equipment Selection (MPES), Springer, Perth, WA,
Australia, Dec. 2-5, pp.42-50.
C56. MORADI AFRAPOLI, A. and Askari-Nasab, H. (2019). “Simulation and
Optimization Framework for Evaluating the Surface Mining Operations ".
Paper presented at the 39th International Symposium on Application of
Computers and Operations Research in the Mineral Industry - APCOM 2019:
Mining Goes Digital, Wroclaw, Poland, June 04-06, 2019, pp. 393-401.
C55. Askari-Nasab, H., TABESH, M., UPADHYAY, S., and BADIOZAMANI, M. M.
(2019). “Data-Driven Autonomous Haulage Systems Simulation”. Presented
at the CIM Convention & Expo, Session: Interoperability and Integration,
Stream: Innovation, Automation and Data Montréal, QC, Canada, April 28
to May 1, 2019.
C54. MORADI AFRAPOLI, A., TABESH, M., UPADHYAY, S. and
Askari-Nasab, H.
(2019). “A Mixed Integer Linear Programming Approach towards Truck
Dispatching Problem in Surface Mines”. Presented at the Session
Innovations & Technologies: Automation in Mining: The Present and The
Future - 92nd SME Annual Conference and Expo, Denver, Colorado, United
states, February 24-27, 2019.
C53. UPADHYAY, S. and Askari-Nasab, H. (2019). “Simulation for
Productivity Prediction of Life of Mine Plans”. Presented at the Session
Operations: Mine Scheduling and Optimization II - 92nd SME Annual
Conference and Expo, Denver, Colorado, United states, February 24-27,
2019.
C52. AFRAPOLI, A. M. and Askari-Nasab, H. (2018). “A
Transportation Problem-Based Stochastic Integer Programming Model to
Dispatch Surface Mining Trucks under Uncertainty". Paper presented at
the 27th International Symposium on Mine Planning and Equipment
Selection - MPES 2018, Santiago, Chile, November 20-22, 2018, pp.
255-264.
C51. UPADHYAY, S. and Askari-Nasab, H. (2018). “Short-Term
Production Scheduling by Allocating Shovels over Continuous Time Frames
in Open Pit Mines ". Paper presented at the DEPLAMIN project workshop by
Universidad Adolfo Ibañez (Desafíos en Planificación Minera - Challenges
in Mine Planning), November 16-19, 2018, Santa Cruz, Chile.
C50.
AFRAPOLI, A. M., UPADHYAY, S., and
Askari-Nasab, H. (2018). “An integrated multi objective multi stage
mining fleet management system linking dynamic operation to short-term
plan". Paper presented at the SME Annual Conference and Expo and 91st
Annual Meeting of the SME-MN Section, Minneapolis, MN, United states,
February 25-28, 2018, 10 pages.
C49. Askari-Nasab, H. (2017),
“Balancing Practicality vs Maximizing NPV using Whittle”. Presented at
the GEOVIA North American User Conference, Toronto, Canada, October
24-26, 2017.
C48. UPADHYAY, S. and Askari-Nasab H.
(2017), " Optimal Shovel
Allocations for Desired Grade Blending in Open Pit Mines", in
Proceedings of Geomin-Mine Planning – 5th International Seminar on Mine
Planning, ©Gecamin, Santiago, Chile, August 23 - 25, 2017, 7 pages.
C47. MORADI AFRAPOLI A., TABESH M., and
Askari-Nasab H.
(2017), "An Investigation into Dispatch Optimizers using Truck-Shovel
Simulation and a New Multi Objective Truck Dispatching Technique", in
Applications of Computers and Operations Research in Mineral Industry -
38th APCOM, ©Colorado School of Mines, Golden, Colorado, USA, Aug. 9-11,
2017, 10 pages.
C46. UPADHYAY, S. and Askari-Nasab (2017), " Simulation and
Optimization of Mine Operations for Desired Grade Blending in Open Pit
Mines ", in Applications of Computers and Operations Research in Mineral
Industry - 38th APCOM, © Colorado School of Mines, Golden, Colorado,
USA, Aug. 9-11, 2017, 11 pages.
C45. Askari-Nasab, H., TABESH, M., UPADHYAY, S. (2017), " Mine
Haulage Simulation: A Tool Towards Managing Uncertainty", presented at
Haulage and Loading Exhibition and Conference, © Mining Media
International, Inc., May 7-10, 2017, Phoenix, Arizona, USA.
C44. Askari-Nasab, H., TABESH, M., UPADHYAY, S. (2017), "
Industrial Strength Mine Haulage and Extraction Simulation: A key
Towards Operational Excellence", presented at Society for Mining,
Metallurgy & Exploration (SME) Annual Meeting, © SME, Feb. 19-22, 2017,
Denver, Colorado, USA.
C43. JÉLVEZ E., Morales N., Askari-Nasab
H. (2016), " A New Methodology for the Automated Pushback Selection", in
6th International Conference on Innovation in Mine Operations
– MININ 2016, © Gecamin, Santiago, Chile, August 21-23, 2016, pp. 1-8.
C42. TABESH, M., Askari-Nasab, H., Peroni R.,
(2015), "A Comprehensive Approach to Strategic Open Pit Mine Planning
with Stockpile Consideration", in Applications of Computers and
Operations Research in Mineral Industry - 37th APCOM, Fairbanks, USA,
May 23-27, 2015, pp. 326-332.
C41. UPADHYAY, S., Askari-Nasab, H., TABESH, M. and
BADIOZAMANI, M.M., (2015), "Simulation and Optimization in Open Pit
Mining", in Applications of Computers and Operations Research in Mineral
Industry - 37th APCOM, Fairbanks, USA, May 23-27, 2015, pp. 532-543.
C40. UPADHYAY, S., Askari-Nasab, H., TABESH, M. and
BADIOZAMANI, M.M., (2015), "Simulation and Optimization in Open Pit
Mines", in Proceedings of Society for Mining, Metallurgy & Exploration
(SME) Annual Meeting, © SME, Feb. 15-18, 2015, Denver, Colorado, USA,
Preprint 15-051, pp. 1-3.
C39. Askari-Nasab, H.,
UPADHYAY, S., TORKAMANI, E., TABESH, M. and BADIOZAMANI, M.M., (2014),
"Simulation Optimisation of Mine Operational Plans", in Orebody
Modelling and Strategic Mine Planning Symposium / Perth, WA Australia,
24–26 November 2014, pp 299-311.
C38.
Askari-Nasab, H., MIETH, C., and TABESH, M., (2013), "A Hybrid
Local Search/Mixed Integer Programming Approach to Open Pit Controlled
Phase-Design," in Applications of Computers and Operations Research in
Mineral Industry - 36th APCOM, Porto Alegre, Brazil, November 4-8, 2013,
pp. 502-514.
C37. Askari-Nasab, H.
and TORKAMANI, E., (2013), "Truck-Shovel Operational Planning Using
Discrete Event Simulation," in Applications of Computers and Operations
Research in Mineral Industry - 36th APCOM, Porto Alegre, Brazil,
November 4-8, 2013, pp. 515-526.
C36. BADIOZAMANI, M. M.
and Askari-Nasab, H., (2013), "Integration of Oil Sands Tailings and
Reclamation Planning with Long-Term Mine Planning", in Proceedings of
World Mining Congress (WMC), © CIM, Montreal, Quebec, Canada, August
11-15, papr 654, pp. 1-19.
C35. TABESH, M.,
MIETH, C., and Askari-Nasab, H., (2013), "Open Pit Production Planning
using Controlled Pushbacks and Aggregates", in Proceedings of World
Mining Congress (WMC), © CIM, Montreal, Quebec, Canada, August 11-15,
paper 668,
pp. 1-11.
C34. Askari-Nasab, H.
and POURRAHIMIAN, Y., (2013), "Mathematical Programming for Sequence
Optimization in Block-Cave Mining", in Proceedings of Mine Planning -
3rd International Seminar, © Gecamin, Santiago, Chile, July 24-26, pp.
1-10.
C33. TABESH, M. and
Askari-Nasab, H., (2013), "Automatic Creation of Ore-Selection
and Blast Polygons using Clustering Algorithms ", in Proceedings of
Society for Mining, Metallurgy & Exploration (SME) Annual Meeting, ©
SME, Denver, Colorado, USA,
Preprint 13-134, pp. 1-6.
C32.
BADIOZAMANI, M. M. and Askari-Nasab, H., (2013), "Integration of
Long-Term Mine Planning, Tailings and Reclamation Plans", in Proceedings
of Society for Mining, Metallurgy & Exploration (SME) Annual Meeting, ©
SME, Denver, Colorado, USA, Preprint
13-080, pp. 1-8.
C31. BADIOZAMANI,
M. M. and Askari-Nasab, H., (2012), “An Integration of
Long-Term Mine Planning, Tailings and Reclamation Plans”, in Proceedings
of Third International Oil Sands Conference, © University of Alberta,
Edmonton, Alberta, Canada, Dec.
2-5, pp. 103-112.
C30. BEN-AWUAH, E.
and Askari-Nasab, H., (2012), “A Mathematical Programming Model for Oil
Sands Production Scheduling and Waste Management”, in Proceedings of
Tailings and Mine Waste Conference, © Colorado State University,
Keystone, Colorado, USA, Oct. 14-17, pp. 593-608.
C29. BADIOZAMANI, M. M.
and Askari-Nasab, H., (2012), “Towards Integration of Oil Sands
Mine Planning with Tailings and Reclamation Plans”, in Proceedings of
Tailings and Mine Waste Conference, © Colorado State University,
Keystone, Colorado, USA, Oct. 14-17, pp. 609-622.
C28. Askari-Nasab, H.
and POURRAHIMIAN, Y., (2012), “An Application of Mixed Integer Linear
Programming for Block Cave Production Scheduling”, in
Proceedings of 5th International Conference on Innovation in Mine
Operations (MININ), ©GECAMIN, Santiago, Chile, June 20-22, pp. 594-614.
C27. POURRAHIMIAN, Y., Askari-Nasab, H., and Tannant,
D., (2012), “Block Cave Production Scheduling Optimization using
Mathematical Programming”, 6th International Conference on Mass Mining
(MassMin 2012), © CIM, Sudbury, Ontario, Canada, June 10-14, paper No,
6799, pp. 1-8.
C26.
Askari-Nasab, H., TORKAMANI, E., BADIOZAMANI, M.
M., and TABESH, M., (2012), "Alignment of Short-Term and Operational Plans
Using Discrete Event Simulation", in Proceedings of Society for Mining,
Metallurgy & Exploration (SME) Annual Meeting, CD-ROM, Preprint 12-064, ©
SME, Seattle, Washington, USA, Feb. 19- 22, pp.
304-311.
C25. Awuah-Offei, K., OSEI, B. A., and Askari-Nasab,
H., (2012), "Improving Truck-Shovel Energy Efficiency through Discrete Event
Modeling", in Proceedings of Society for Mining, Metallurgy & Exploration
(SME) Annual Meeting, CD-ROM, Preprint 12-069, © SME, Seattle, Washington,
USA, Feb. 19- 22,
pp. 333-338.
C24. BROWN, O. F., Awuah-Offei, K., Frimpong,
S., and Askari-Nasab, H., (2012), " High Performing HMA Design
Optimization", in Proceedings of Society for Mining, Metallurgy &
Exploration (SME) Annual Meeting, CD-ROM, Preprint 12-140, © SME, Seattle,
Washington, USA, Feb. 19- 22, pp.
680-684.
C23. Askari-Nasab, H., EIVAZY, H., TABESH, M., and BADIOZAMANI, M. M.,
(2011), "A Mathematical Programming Model for Open Pit Short-term Production
Scheduling", in Proceedings of Society for Mining, Metallurgy & Exploration
(SME) Annual Meeting, CD-ROM, Preprint 11-038, © SME, Denver, Colorado, USA,
Feb. 27-Mar. 02, pp.
213-220.
C22. OSEI B. A., Awuah-Offei, K., and Askari-Nasab, H., (2011), "Effect of
Cycle Time on Work Done by the Pistons during Hydraulically Actuated
Clamshell Dredging", in Proceedings of Society for Mining, Metallurgy &
Exploration (SME) Annual Meeting, CD-ROM, Preprint 11-078, © SME, Denver,
Colorado, USA, Feb. 27-Mar. 02, pp.
438-445.
C21. Askari-Nasab, H. and BEN-AWUAH, E., (2011), "Integration of Oil
Sands Mine Planning and Waste Management Using Goal Programming," in 35th
Application of Computers and Operations Research in the Minearls Industry
(APCOM) Wollongong, New South Wales, Australia: The Australasian Institute
of Mining and Metallurgy (AusIMM), pp. 329-350.
C20. BEN-AWUAH, E. and Askari-Nasab, H., (2010), "Oil Sands Mine Planning and
Waste Management Using Goal Programming", in Proceedings of Second
International Oil Sands Tailings Conference, © University of Alberta,
Department of Civil and Environmental Engineering, Edmonton, Alberta,
Canada, December 5-8, 2010 pp. 149-162.
C19. Askari-Nasab, H.,
TABESH, M., BADIOZAMANI, M. M., and EIVAZY, H., (2010), "Hierarchical
Clustering Algorithm for Block Aggregation in Open Pit Mines", in
Proceedings of Mine Planning and Equipment Selection (MPES), © AusIMM,
Fremantle, Australia, December 1-3, 2010, pp. 469-479.
C18.
Askari-Nasab, H., TABESH M., and BADIOZAMANI M. (2010)
“Creating Mining Cuts Using Hierarchical Clustering and Tabu Search
Algorithms”, International Conference on Mining Innovation (MININ 2010), ©
GECAMIN, Santiago, Chile, June 23-25, 2010, pp. 159-171.
C17. Askari-Nasab, H. and Awuah-Offei K. (2010) “A Clustering
Algorithm for Open Pit Mine Production Scheduling”, Society for
Mining,
Metallurgy & Exploration (SME) Annual Meeting Preprint, ©SME, Phoenix,
Arizona, USA,
Feb. 28 - March 3,
pp. 1-8.
C16.
BEN-AWUAH,
E., KALANTARI, S., POURRAHIMIAN, Y., and Askari-Nasab, H., (2009),
"Simulating the production of a multi element ore-body with an alternating
crushing schedule", Mine Planning and Equipment Selection (MPES) CD-ROM,
Banff, Alberta, Canada, November 16-19, 2009, pp. 150-162.
C15. KOUSHAVAND,
B. and Askari-Nasab, H., (2009), "Transfer of Geological Uncertainty into
Mine Planning", Mine Planning and Equipment Selection (MPES) CD-ROM, Banff,
Alberta, Canada, November 16-19, 2009, pp. 462-476.
C14. Askari-Nasab, H., Awuah-Offei, K.,
and Szymanski, J., (2009), "Multi-index Mixed Integer Linear Programming
Model for Open Pit Production Scheduling", Mine Planning and Equipment
Selection (MPES) CD-ROM, Banff, Alberta, Canada, November 16-19, 2009, pp.
52-61.
C13.
POURRAHIMIAN, Y., Askari-Nasab, H.,
and Tannant, D., (2009), "Production Scheduling with Minimum Mining Width
Constraints Using Mathematical Programming", Mine Planning and Equipment
Selection (MPES) CD-ROM, Banff, Alberta, Canada, November 16-19, 2009, pp.
646-653.
C12. Askari-Nasab, H. and Awuah-Offei,
K., (2009), "Mixed Integer Programming Models for Intermediate Open Pit
Scheduling with Variable Slopes", Application of Computers and Operations
Research in the Mineral Industry (APCOM) (CD-ROM), © The Canadian Institute
of Mining, Metallurgy and Petroleum, Vancouver, Canada, Oct. 6-9, 2009,
pp. 173-182.
C11. Awuah-Offei, K. and Askari-Nasab, H., (2009), "Aggregate
Plant Inventory Management through HMA Mix Optimization", SME Annual Meeting
Preprint, © Society of Mining, Metallurgy & Exploration, Denver, CO, USA,
Preprint 09-097, February 22-25, pp. 606-610.
C10. Awuah-Offei, K., Checkel, D., and Askari-Nasab, H., (2008),
"Life Cycle Assessment of Belt Conveyor and Truck Haulage Systems in an Open
Pit Mine", SME Annual Meeting Proceeding CD-ROM, © Society for Mining,
Metallurgy, & Exploration, Salt Lake City, Utah, February 24-27, pp. 128-138.
C9
Askari-Nasab, H., and Szymanski, J.,
(2007), “Open Pit Production Scheduling Using Reinforcement Learning“,
proceeding of 33rd International Symposium on Computer
Application in the Minerals Industry (APCOM), © GECAMIN LTDA, Santiago,
Chile, April 24- 27, pp.
321-326.
C8. Askari-Nasab, H. and Szymanski, J., (2007), "Continuous Modeling of
Open Pit Dynamics", proceeding of Sixteenth International Symposium on Mine
Planning and Equipment Selection (MPES), © The Reading Matrix Inc., Bangkok,
Thailand, December 11-13, pp. 665-677.
C7.
Askari-Nasab, H. and Szymanksi, J.,
(2006), “Intelligent Agent Framework for Long-Term Mine Planning”,
Proceeding of Fifteenth International Symposium of Mine Planning and
Equipment Selection (MPES),
Torino, Italy, Sep. 20-22.
, pp. 1076-1082.
C6. Askari-Nasab,
H. and Szymanksi, J., (2005), “Production
Scheduling Estimator using Reinforcement Learning“, proceeding of 20th
World Mining Congress & EXPO 2005, Tehran, Iran, Nov. 7-11, pp.1-7.
C5. Askari-Nasab, H. and Szymanksi, J.,
(2005), “Modeling Open Pit Dynamics using Monte Carlo Simulation”, Computer
Applications in the Minerals Industry (CAMI), Banff, Alberta, Canada, Oct.
31-Nov. 3, pp. 21-32.
C4.
Awuah-Offei,
K., Frimpong, S. and Askari-Nasab H., (2005), “Dynamic Simulation of Cable Shovel
Specific Energy in Oil Sands Excavation”, Computer Applications in the
Minerals Industry (CAMI), Banff, Alberta, Canada, Oct. 31-Nov. 3, pp. 33-45.
C3.
Askari-Nasab,
H., Frimpong, S., and Awuah-Offei, K.,
(2005), “Intelligent Optimal Production Scheduling Estimator“,
proceeding of 32nd International Symposium on Computer
Application in the Minerals Industry (APCOM), © Taylor & Francis Group,
Tucson, Arizona, USA, March 30 - April 1st, pp. 279-285.
C2. Askari-Nasab H,
Awuah-Offei, K., and Frimpong, S., (2004), “Stochastic Simulation of Open
Pit Push-backs with a Production Simulator“, CIM Mining Industry Conference
and Exhibition CD ROM, Edmonton, Alberta, Canada, May 9-12.
C1.
Osanloo, M. and Askari-Nasab, H., (2003), “Optimizing Ultimate Pit Limits of Gol-E-Gohar
Iron Mine of IRAN using 3D Lerchs & Grossman Algorithm”, CAMI Conference
Proceeding CD ROM, Calgary, Alberta, Canada, Sep. 8-10.
Top of the page
●
Badiozamani, MM.,
Pourrahimian, Y., Ben-Awuah, E., Moradi Afrapoli, A. and Askari-Nasab, H.
(2023), Mining Optimization Laboratory (MOL) – Report Eleven, 2022/2023 ©
MOL, University of Alberta, Edmonton, Canada, , September 2023, 18 papers
365 Pages, ISBN: 978-1-55195-503-2.
●
Badiozamani, MM., Pourrahimian, Y., Ben-Awuah, E., Moradi Afrapoli, A. and
Askari-Nasab, H. (2022), Mining Optimization Laboratory (MOL) – Report Ten,
2021/2022, © MOL, University of Alberta, Edmonton, Canada, September 2022,
20 papers, 425 Pages, ISBN: 978-1-55195-486-8.
●
Yashar Pourrahimian,
Eugene Ben-Awuah, and Hooman Askari-Nasab (2018), Mining Optimization
Laboratory (MOL) Annual Report Nine 2017/2018, © MOL, University of
Alberta, Edmonton, Canada, 20 papers, 378 Pages, September 2018
ISBN: 978-1-55195-414-1.
●
Yashar
Pourrahimian,
Eugene Ben-Awuah, and Hooman Askari-Nasab (2017), Mining Optimization
Laboratory (MOL) Annual Report Eight 2016/2017, © MOL, University of
Alberta, Edmonton, Canada, 19 papers, 306 Pages, September 2017
ISBN: 978-1-55195-383-0.
●
Yashar
Pourrahimian,
Eugene Ben-Awuah, and Hooman Askari-Nasab (2016), Mining Optimization
Laboratory (MOL) Annual Report Seven 2015/2016, © MOL, University of
Alberta, Edmonton, Canada, 13 papers, 240 Pages, September 2016
ISBN: 978-1-55195-367-0.
● Yashar Pourrahimian, Eugene Ben-Awuah, and Hooman Askari-Nasab
(2015), Mining Optimization Laboratory (MOL)
Annual Report Six
2014/2015, ©MOL, University of Alberta,
Edmonton, Canada, 14 Papers, 250 Pages, September 2015, ISBN:
978-1-55195-356-4 .
●
Hooman Askari-Nasab
(2013), Mining Optimization Laboratory (MOL)
Annual Report Five
2012/2013, ©MOL, University of Alberta,
Edmonton, Canada, 11 Papers, 230 Pages, September 2013, ISBN:
978-1-55195-327-4.
●
Hooman Askari-Nasab
(2012), Mining Optimization Laboratory (MOL)
Annual Report Four
2011/2012, ©MOL, University of Alberta,
Edmonton, Canada, 15 Papers, 340 Pages, September 2012, ISBN:
978-1-55195-301-4.
●
Hooman Askari-Nasab
(2011), Mining Optimization Laboratory (MOL)
Annual Report Three
2010/2011, ©MOL, University of Alberta,
Edmonton, Canada, 17 Papers, 335 Pages, September 2011, ISBN: 978-1-55195-281-9.
●
Hooman Askari-Nasab (2010), Mining Optimization
Laboratory (MOL)
Annual Report Two
2009/2010, ©MOL, University of Alberta,
Edmonton, Canada, 18 Papers, 335 Pages, September 2010, ISBN: 978-1-55195-280-2.
●
Hooman Askari-Nasab (2009), Mining Optimization
Laboratory (MOL)
Annual Report One
2008/2009, ©MOL, University of Alberta,
Edmonton, Canada, 18 apers, 335 Pages, September 2009, ISBN: 978-1-55195-279-6.
Top of the page
