Journal Papers

1. Z. Lyu, R. Kannan, N. Saini, J. Li, and L. Li, 2024, "Degradation of a Cr-Mo Steel by Carbide Precipitation over Long-term Service", Materials Science & Engineering A, 898 (2024) 146345. PDF available here.
   
   
2. M. Karimzadeh, M. Malekan, H. Mirzadeh, N. Saini, M. Farhani, and L. Li, 2024, "Hot Deformation Analysis of As-cast CoCrFeNi High Entropy Alloy Using Arrhenius-type and Artificial Neural Network Models", Intermetallics,168 (2024), 108240. PDF available here.
   
   
3. J. Li, P. Yu, N. Saini, L. Li, 2024, "Crack-Tip Opening Displacement of Girth Welds in a Lean X70 Pipeline Steel", Materials, 2024, 17, 391. PDF available here.
   
   
4. J. Wang, L. Li, and P. Xu, 2023, "Visual Sensing and Depth Perception for Welding Robots and Their Industrial Applications", Sensors, 2023, 23(24), 9700. PDF available here.
   
   
5. K. Ravikiran, L. Li, N. Sharma, N. Anderson, Y. Wang, S. Choudhury, N. Saini, M. Rashid, 2024, "Post-Weld Heat-Treatment on Toughness of Electric-Resistance Welded X70 Steel", Welding Journal, July (2024) 1s-16s. DOI: 10.29391/2024.103.017. PDF available here.
   
   
6. S. Dev Choudhury, W. Khan, Z. Lyu, L. Li, 2023, "Failure Analysis of Blowholes in Welded Boiler Water Walls", Engineering Failure Analysis, DOI: 10.1016/j.engfailanal.2023.107560. PDF available here.
   
   
7. J. Lin, J. Wang, C. Xu, B. Li, B. Chen, P. Xu, and L. Li, 2023, "Pre-placed metal strip-based laser additive manufacturing on grade-5 titanium alloy: Effect of laser parameters and additive materials on formation, oxidation resistance and wear resistance", Metals, 2023, 13, 1372. PDF available here.
   
   
8. J. Wang, P. Xu, L. Li, F. Zhang, 2023, "DAssd-Net: A lightweight steel surface defect detection model based on multi-branch dilated convolution aggregation and multi-domain perception detection head", Sensors, 2023, 23, 5488. PDF available here.
   
   
9. J. Li, Z. Lyu, M. Shi, and L. Li, 2023, "Aluminum Inoculated Overlay Microstructure for an Enhanced Scratch Resistance", Tribology International, DOI: 10.1016/j.triboint.2023.108549. PDF available here.


10. K. Ravikiran, L. Li, and G. Lehnhoff, N. Sharma, R. Kannan, N. Saini, S. Choudhury, and Z. Lyu, 2023, "Microstructure and Texture of As-Welded HF-ERW Joint of X65 Pipeline Steel", Materials Chemistry & Physics, 302 (2023) 127758. PDF available here.


11. S. Dev Choudhury, L. Li, N. Saini, W. Khan, Z. Lyu, K. Ravikiran, 2023, "3D characterization of internal defects for fatigue performance of welded SA192 steel water walls", International J. Pressure Vessels & Piping, 202 (2023) 104922. PDF available here.


12. N. Saini, L. Li, Y. Wang, Z. Feng, T. Lienert, 2023, "Welding of Grade P91 and Grade P92 steels", Welding Journal, in review.


13. W. N. Khan, R. Chhibber, N. Saini, R. Kopparthi, Z. Tervonen, and L. Li, 2023, "Development and performance of ochre (anhyd. Fe2O3) added CaO-CaF2-TiO2-SiO2 fluxes for welding electrode", Journal of Sustainable Metallurgy, DOI: 10.1007/s40831-023-00650-z. PDF available here.


14. P. Zhang, J. Wang, F. Zhang, P-Q. Xu, L. Li, and B. Li, 2022, "Design and analysis of welding inspection robot", Scientific Reports, (2022) 12:22651. DOI: 10.21203/s41598-022-27209-4. PDF available here.


15. J. Li, B. Cao, H. Chen, and L. Li, 2022, "Accelerated design of chromium carbide overlays via design of experiment and machine learning", Materials Letters, DOI: 10.1016/j.matlet.2022.133672.


16. N. Saini, R. S. Mulik, M. M. Mahapatra, and L. Li, 2022, "Effect of preheating temperature on retention of delta-ferrite in Grade P92 steel welds", Metallurgical & Materials Transactions B, DOI :10.1007/s11663-022-02692-2.


17. M. Karimzadeh, M. Malekan, H. Mirzadeh, L. Li, and N. Saini, 2022, "Effects of Titanium Addition on the Microstructure and Mechanical Properties of Quaternary CoCrFeNi High Entropy Alloy", Materials Science & Engineering A, 856 (2022) 143971, DOI: 10.1016/j.msea.2022.143971.


18. S. Dev Choudhury, N. Saini, Z. Lyu, R. Kopparthi, Z. Tervonen, and L. Li, 2022, "Effect of hydrostatic preload on strain hardening and strain aging of boiler tubes", International J. Pressure Vessels & Piping, 200 (2022) 104806. DOI:10.1016/j.ijpvp.2022.104806.


19. Y.J. Wang, L. Li, Z. Lyu, N. Saini, and Z. Wu, 2022, "Flow-Accelerated Corrosion Damage in a Steam-Pipe Girth Weld", Journal of Materials Engineering & Performance, DOI: 10.1007/s11665-022-07353-8.


20. W. N. Khan, R. Chhibber, N. Saini, Y.J. Wang, R. Kopparthi, S. Choudhury, and L. Li, 2023, "Corrosion of Dissimilar GTA Welds for Marine Applications", Welding Journal, (2023) 13-s to 23-s DOI: 10.29391/2023.102.02.PDF here


21. N. Saini, Y. Wang, and L. Li, 2022, "Failure analysis of once-through steam generator (OTSG) external piping welds", Journal of Failure Analysis & Prevention, DOI: 10.1007/s11668-022-01407-8.


22. Du, K., Huang, S., Shi, M., Li, L., Huang, H., Zhang, S., Zheng, W., Yuan, X., 2021, "Effects of biaxial tensile mechanical properties and non-integer exponent on description accuracy of anisotropic yield behavior", Materials & Design 212 (2021) 110210, PDF available at doi.org/10.1016/j.matds.2021.110210


23. M. Shi, M. Di, J. Zhang, R. Kannan, J. Li, X. Yuan, and L. Li, 2021, "Effect of Initial Microstructure on Toughness of Coarse-grained Heat-affected Zone in a Microalloyed Steel", Materials, 2021, 14(16), 4760. PDF available at doi.org/10.3390/ma14164760.


24. J. Li, Y.J. Wang, N. Sharma, Z. Lyu, S. Choudhury, and L. Li, 2021, "Fracture of Ni-Cr-Si-B Thermal Spray Coated Steel Reciprocating Pump Rods During Straightening", Engineering Failure Analysis, DOI: 10.1016/j.engfailanal.2021.105576.


25. N. Sharma, R. Kannan, L. Li, N. Anderson, M. Rashid, L. Collins, J. Poplawsky, and R. Unocic, 2021, "A Mechanism for Carbon Depletion at Bondline of High-frequency Electric-Resistance Welded X70 Pipeline Steel", Metallurgical and Materials Transactions A, DOI: 10.1007/s11661-021-06339-w.


26. D. Unsworth, R. Driver, L. Li, S. Twizell, and A. Imanpour 2021, "Characterization of Residual Stresses for LTB Simulations of Modern Welded Girders", J. Constructional Steel Research, DOI: 10.1016/j.jcsr.2021.106769.


27. N. Sharma, R. Kannan, J. Hogan, G. Fisher, and L. Li, 2021, "Progress in Improving Joint Strength of Brazed Cemented Carbides and Steels", Science & Technology of Welding & Joining, DOI: 10.1080/13621718.2021.1931764.


28. Z. Ma, M. Zhang, L. Li, F. Xia, and Z. Xu, 2020, "Effect of Al-Si alloy coating on interfacial reactions and tensile strength in the Ti/Al dissimilar brazing joints", International J. Materials Research, DOI: 10.3139/146.111971.


29. Y. Li, C. Liu, Z. Wu, L. Li, 2020, "GMAW Molten Pool Micrograph Image Recognition Based on Convolution Neural Network and Transfer Learning", Acta Microscopica, 29(5), 2769-2778.


30. L. Li, R. Kannan, Y. Wang, N. Sharma, 2020, "Microstructural Aging and Property Degradation of Service-Exposed 1Cr-1/2Mo Coke Drums", Materials Science & Technology, DOI: 10.1080/02670836.2020.1852665.


31. N. Sharma, L. Li, Y. Wang, S. D. Choudhury, A. Suzuk, and M. Garcia, 2020, "Differences in Service-Exposed and Artificially-Aged Microstructure and Tensile Properties of ASTM A204 Grade C Steel", Materials Science & Technology, DOI: 10.1080/02670836.2020.1852667.


32. J. Li, R. Kannan, M. Shi, Z. Lyu, and L. Li, 2020, "Viability of Button Melting for Accelerated Development of Chromium Carbide Overlay", Materials Letters, DOI: 10.1016/j.matlet.2020.128455.


33. N. Saini, R. Mulik, M. Mahapatra, R. Kannan, N. Sharma, and L. Li, 2020, "Dissolution of delta-Ferrite and Its Effect on Mechanical Properties of P92 Steel Welds", Materials Science & Engineering A, DOI: 10.1016/j.msea.2020.139370.


34. J. Li, R. Kannan, M. Shi, and L. Li, 2020, "Solidified Microstructure of Wear Resistant Fe-Cr-C-B Overlays", PDF available at Metallurgical and Materials Transactions 50th Anniversary Collection, Metallurgical & Materials Transactions B, 51B (2020) 1291-1300. DOI: 10.1007/s11663-020-01863-3.


35. R. Kannan, L. Li, L. Guo, N. Anderson, M. Rashid, L. Collins, and M. Arafin, 2020, "Bond Formation Mechanism for Electric Resistance Welding (ERW) of X70 Pipeline Steel", Welding Journal, DOI: 10.29391/2020.99.020.PDF here


36. D. Unsworth, R. Driver, and L. Li, 2020, "Measurement and Prediction of Residual Stresses in Welded Girders", J. Constructional Steel Research, DOI: 10.1016/j.jcsr.2020.106007.


37. Y. Wang, R. Kannan, and L. Li, 2020, "Insight into Type IV Cracking of Grade 91 Steel Weldments", Materials & Design, 190 (2020) 108570. PDF available at DOI: 10.1016/j.matdes.2020.108570.


38. N. Saini, R. Mulik, M. Mahapatra, N. Sharma, and L. Li, 2020, "Dissolution of Laves Phase by Re-austenitization and Tempering of CSEF Steel", Materials Science & Technology, DOI: 10.1080/02670836.2020.1724404.


39. M. Shi, R. Kannan, J. Zhang, X. Yuan, and L. Li, 2019, "Effect of Zr Microalloying on Austenite Grain Size of Low-Carbon Steels", Metallurgical & Materials Transactions B, DOI: 10.1007/s11663-019-01701-1.


40. N. Huda, Y. Wang, L. Li, and A. Gerlich, 2019, "Effect of Martensite-Austenite (MA) Distribution on Mechanical Properties of Inter-Critical Reheated Coarse Grain Heat Affected Zone in X80 Linepipe Steel", Materials Science & Engineering A, DOI: 10.1016/j.msea.2019.38301.


41. D. Liu, W. Long, M, Wu, L. Li, and P. Wei, 2019, "Microstructure and Wear Performance of Co-containing Iron-based Slag-free Self-shielded Flux-cored Wire", J. Materials Engineering & Performance, DOI: 10.1007/s11665-019-04002-5.


42. R. Kannan, Y. Wang, J. Poplawski, S. S. Babu, and L. Li, 2019, "Cascading phase transformations in high carbon steel resulting in formation of inverse bainite: An atomic scale investigation", Scientific Reports, (2109)9:5597. PDF available at DOI: 10.1038/s41598-019-42037-9.


43. D. Liu, R. Kannan, Y. Wang, W. Long, M, Wu, and L. Li, 2019, "Effect of Mo on microstructure and wear resistance of slag-free self-shielded metal-cored welding overlay", J. Materials Processing Technology, DOI:10.1016/j.jmatprotec.2019.02.024.


44. Y. Li, F. Qin, C. Liu, L. Li, X. Zhao, Z. Wu, 2019, "Influence of annealing treatment on microstructure evolution and mechanical property of friction stir welded AZ31 Mg alloy", J. Wuhan University of Technology - Mater. Sci. Edition, 34(2), 417-425. DOI: 10.1007/s11595-019-2068-0.


45. R. Kannan, Y. Wang, and L. Li, 2019, "Banded Microstructure in a Low Alloyed Eutectoid Steel", Materials Science & Technology, DOI: 10.1080/02670836.2019.1567030.


46. R. Kannan, Y. Wang, R. Bannister, M. Rashid, and L. Li, 2018, "Homogenization of Austenite During Non-Equilibrium Heating in Hypereutectoid Steels", Materials Science & Technology, DOI: 10.1080/02670836.2018.1530422.


47. D. Liu, M. Wu, W. Long, P. Wei, and L. Li, 2018, "Effect of simultaneous addition of ferroniobium and ferrotitanium on properties of hardfacing", Materials Science & Technology, DOI: 10.1080/02670836.2018.1524053.


48. Li, Y., Qin, F., Liu, C., Li, L., and Wu, Z., 2018, "Influence of rotation rate on microstructure and comprehensive performance of FSWed Mg alloy", J. Materials Engineering & Performance, (2018) 27(11): 5635-5643.


49. D. Liu, L. Li, M. Wu, W. Long, P. Wei, N. E. Anderson, R. Kannan, 2018, "Development of nickel-added iron-based slag-free self-shielded metal-cored wire", Welding Journal, DOI: 10.29391/2018.97.023.


50. R. Kannan, Y. Wang, L. Li, 2018, "A Thermodynamics Study of Inverse Bainitic Transformation", J. Materials Science, DOI: 10.1007/s10853-018-2541-8.


51. Y. Wang, R. Kannan, and L. Li, 2018, "Correlation between Intercritical Heat-affected Zone and Type IV Creep Damage Zone in Grade 91 Steel", Metallurgical & Materials Transactions A, DOI: 10.1007/s11661-018-4490-x


52. N. Anderson, W. Ellen, J. Cocchio, L. Li, and L. Lefsrud, 2018, "Fostering `Soft-Skill' Graduate Attribute Development using Multifaceted Instructional Strategies in an Undergraduate Engineering Course", J. Online Engineering Education, 9(1), 1-11.


53. Y. Wang, L. Li, and R. Kannan, 2018, "Transition from Type IV to Type I Cracking in Heat-Treated Grade 91 Steel Weldments", Materials Science & Engineering A, DOI: 10.1016/j.msea.2017.12.088.


54. R. Kannan, Y. Wang, M. Nouri, D-Y. Li, and L. Li, 2018, "Instrumented Indentation Study of Bainite/Martensite Duplex Microstructure", Materials Science & Engineering A, DOI: 10.1016/j.msea.2017.12.052.


55. Y. Wang, R. Kannan, L. Li, Y. Suzuk, D. Ting, S. Yuen, and M. Garcia, 2018, "Jagged Cracking in the Heat-Affected Zone of Weld Overlay on Coke Drum Cladding", Engineering Failure Analysis, 85(3), 14-25. DOI: 10.1016/j.engfailanal.2017.12.006.


56. R. Kannan, Y. Wang, L. Li, 2017, "A Dilatometric Analysis of Inverse Bainite Transformation", J. Materials Science, DOI: 10.1007/s10853-017-1752-8.


57. R. Kannan, Y. Wang, and L. Li, 2017, "Microstructure Evolution of Inverse Bainite in a Hypereutectoid Low Alloy Steel", Metallurgical & Materials Transactions A, DOI: 10.1007/s11661-017-4373-6.


58. Y. Wang, D-Y. Park, and L. Li, 2017, "Microstructural Analysis of Fracture in Heat-affected Zone of Two X70 Pipeline Steel Weldments", Canadian Metallurgical Quarterly, DOI: 10.1080/00084433.2017.1390643.


59. M. Wu, F. Liu, J. Pu, N. Anderson, L. Li, and D. Liu, 2017, "Microstructure and Pitting Resistance of Weld Joints of 2205 Duplex Stainless Steel", Journal of Materials Engineering & Performance, DOI: 10.1007/s11665-017-2976-0.


60. J. Tang, B. Chen, Y. Shi, and L. Li, 2017, "Effect of Welding Parameters under a Constant Heat Input on Formation of Overlay and Coarse-Grained Heat-affected Zone", Electric Welding Machines, 47(7), 6-9. (in Chinese)


61. C. DiGiovanni, L. Li, R. Driver, and L. Callele, 2017, "Cracking in Welded Steel Platform Structures During Hot-dip Galvanization", Engineering Failure Analysis, 79(2017), 1031-1042.


62. D-Y. Park, B. S. Amirkhiz, J-P. Gravel, Y. Wang, L. Li, R. Zavadil, J. Liang, P. Liu, A. He, and M. Arafin, 2017, "Effect of Heat-Affected Zone Microstructure on Fracture Toughness of Two X70 Pipe Girth Welds", Metallurgical & Materials Transactions A, 48A(7), 3248-3260


63. Wang, Y., Kannan, R., Zhang, L., and Li, L., 2017, "Microstructural Analysis of the As-Welded Heat-Affected Zone of a Grade 91 Steel Heavy Section Weldment", Welding Journal, 97(6), 161s-177s.


64. Kannan, R., Wang, Y., and Li, L., 2017, "Inverse Bainite Microstructure in Fe-0.84C-1Cr-1Mn Hypereutectoid Low Alloy Steel", Metallurgical & Materials Transactions A, 48(3), 948-952.


65. Wang, Y., Kannan, R., and Li, L., 2016, "Identification and Characterization of Intercritical Heat-Affected Zone in As-welded Grade 91 Weldment", Metallurgical & Materials Transactions A, 47(12), 5680-5684.


66. Li, L., Silwal, B., and Deceuster, A., 2016, "Creep Rates in Heat-affected Zone of Grade 91 Welds Determined by Stress-relaxation Tests", Int. J. Pressure Vessel & Piping, 146 (2016), 95-103.


67. Xu, P-Q., Li, L., 2017, "Microstructure of Fiber Laser Deposited of WC-Co Cemented Carbide and Carbon Steel", Materials Science Forum, 879, 2138-2143.


68. Xu, P-Q., Zhou, D., Li, L., 2017, "Fiber Laser Welding of WC-Co and Carbon Steel Dissimilar Materials", Welding Journal, 96(1), 1s-10s.


69. Wang, Y., Kannan, R., and Li, L., 2016, "Characterization of As-Welded Microstructure of Heat-affected Zone in Modified 9Cr-1Mo-V-Nb Steel Weldment", Materials Characterization, 118 (2016) 225-234.


70. Wang, Y., Li, L., 2016, "Fine-Grained Heat-Affected Zone in Type IV Failure of Grade 91 Welds", Welding Journal, 95(1), 27-36s.


71. Wang, Y., Rao, M., Li, L., Luo, G., Shen, Q, and Zhang, L., 2016, "Accelerated Bonding of Magnesium and Aluminum with a CuNi/Ag/CuNi Sandwich Interlayer by Plasma Activated Sintering", Metallurgical & Materials Transactions A, 47A(2), 631-636.


72. Carvalho, M. C., Wang, Y., Souza, J. A. S., Braga, E. M., and Li, L., 2015, "Characterization of Phases and Defects in Chromium Carbide Overlays Deposited by SAW Process", Engineering Failure Analysis, 60, 374-382.


73. Chen, H., Li, L., Kemps, R., Michielsen, B., Jacobs, M., Snijkers, F., and Middelkoop, V., 2015, "Reactive Air Brazing for Sealing Mixed Ionic Electronic Conducting Hollow Fibre Membranes", Acta Materialia, 88 (2015) 74-82.

Chen, H., Li, L., Kemps, R., Michielsen, B., Jacobs, M., Snijkers, F., and Middelkoop, V., 2015, "Supplementary Material: Reactive Air Brazing for Sealing Mixed Ionic Electronic Conducting Hollow Fibre Membranes", Acta Materialia, http://dx.doi.org/10.1016/j.actamat.2015.01.029.


74. Wang, Y., Luo, G., Li, L., Shen, Q., and Zhang, L., 2014, "Formation of Intermetallic Compounds in Mg-Ag-Al Joints during Diffusion Bonding", J. Materials Science, doi: 10.1007/s10853-014-8440-8.


75. Li, L., Deceuster, A., and Zhang, C., 2014, "Laser Repair of Directionally Solidified Superalloys", Welding Research Council Bulletin, #543, ISSN 0043-2326, May 2014, New York, NY.


76. Wood, G., Barnes, N., Li, L., and Mendez, P., 2014, "The CCWJ -- A New Player in Welding Research in Canada", The CWA Journal, 2(2), Spring 2014, 56-59.


77. Xu, P-Q., Li, L., and Zhang, C., 2013, "Microstructure Characterization of Laser Welded Ti-6Al-4V Fusion Zones", Materials Characterization, 87C (2014), 179-185. doi:/10.1016/j.matchar.2013.11.005.


78. Silwal, B., Li, L., Deceuster, A., and Griffiths, B., 2013, "Effect of Post-weld Heat Treatment on Toughness of Heat-affect Zone of Grade 91 Steel", Welding Journal, 92(3), 80s-86s


79. Li, L., 2013, "Thermomechanical phenomena in pulsed laser powder deposition", Section on "Thermal Stresses Induced by Laser Heating", Encyclopedia of Thermal Stresses, Edited by Richard B. Hetnarski, Springer, 2013. DOI 10.1007/978-94-007-2739-7


80. Li, L., Deceuster, A., and Zhang, C., 2012, "Effect of Process Parameters on Pulsed-Laser Repair of a Directionally-Solidified Superalloy", Metallography, Microstructure, & Analysis, 1(2): 92-98.


81. Zhang, C., Kallam, R., Deceuster, A., Dasu, A., and Li, L., 2011, "A Thermal-mechanical Coupled Finite Element Model with Experimental Temperature Verification for Vertically Stacked FPGAs", Microelectronic Engineering, 91 (2012) 24-32.


82. Lienert, T., Zhou, N., and Li, L. (Editors) 2011, Division "Solid-State Welding Processes", ASM Handbook, Volume 6 Welding Fundamentals and Processes.


83. Fox, S., and Li, L., 2012, "Expanding the scope of prosumption: a framework for analyzing potential contributions from advances in materials technologies", Technological Forecasting & Social Change, 79 (2012) 721-733.


84. Li, L., and Zhang, C., 2011, Chapter "Fundamentals of Ultrasonic Welding", ASM Handbook, Volume 6 Welding Fundamentals and Processes.


85. Lienert T., Balmforth, M., Brandi, S., Grubb, J., Hochanadel, P., Li, L., Perricone, M., El Sawy, A., and Stratton, P., 2011, Chapter 5: "Stainless and Heat Resistant Steels", in Welding Handbook (9th Edition), American Welding Society, Miami, Florida, USA, 2011


86. Zhang, C., Li, L., and Deceuster, A., 2011, "Thermomechanical Analysis of Multi-bead Pulsed Laser Powder Deposition of a Nickel-based Superalloy", Journal of Materials Processing Technology, 211 (2011) 1478-1487.


87. Li, L., and Virta, J., 2011 "Ultra-high Strength Steel Wires Processed by Severe Plastic Deformation for Ultrafine Grained Microstructure", Materials Science & Technology, 27(5), 845-862.


88. Zhang, C., and Li, L., 2010, "Characterization and Design of Through-silicon Via Arrays in 3-dimensional ICs Based on Thermomechanical Modeling", IEEE Transactions on Electron Devices, 58(2), 279-287.


89. Deceuster, A., Stewardson, G., and Li, L., 2011, "Precision Laser Welding of Thin Structures", Modern Welding Technology (Chinese), 2011 (5), #101: J1-J4. (re-publication of translated July 2010 Welding Journal paper.


90. Deceuster, A., Stewardson, G., and Li, L., 2010, "Precision Laser Welding of Thin Structures", Welding Journal, July 2010, 89(7), 38-41.


91. Zhang, C., Dasu, A., and Li, L., 2010, "Thermo-Mechanical Model of Stacked Field-Programmable Gate Arrays (FPGAs) with Through-Silicon Vias (TSVs)", Electronics Letters, 45(24), 1236-1238.


92. Zhang, C., and Li, L., 2010, "Effect of Substrate Dimensions on Dynamics of Ultrasonic Consolidation", Ultrasonics, 50(2010), 811-825.


93. Zhang, C., and Li, L., 2009, "A Coupled Thermal-Mechanical Analysis of Ultrasonic Bonding Mechanism", Metallurgical and Materials Transactions B, 40B(2), 196-207.


94. Zhang, C., Deceuster, A., and Li, L., 2009, "A Method for Bond Strength Evaluation for Laminated Structures with Application to Ultrasonic Consolidation", Journal of Materials Engineering and Performance, 18(8), 1124-1132.


95. Chen, B., Han, F., Huang, Y., Lu, K., Liu, Y., and Li, L., 2009, "Influence of Nanoscale Marble (Calcium Carbonate CaCO3) on Properties of D600R Surfacing Electrode", Welding Journal, 88(5), 99s-103s.


96. Mahapatra, M.M., and Li, L., 2008, "A Study of Deposit Profiles for Pulsed-laser Powder Deposition of a Superalloy", P I MECH ENG Part B: Journal of Engineering Manufacture, 222(12), 1567-1576.


97. Chen, H., Li, L., and Yu, W., 2008, "Multiscale Finite Element Analysis of Bulk Nano-Particle Fabrication by a Mechanical Method", Journal of Materials Processing Technology, 209 (2009), 4243-4247.


98. Zaveri, N., Mahapatra, M., Deceuster, A., Peng, Y., Li, L., and Zhou, A., 2008, "Corrosion Resistance of Pulsed Laser-treated Ti-6Al-4V Implant in Simulated Biofluids", Electrochimica Acta, 53 (2008) 5022-5032.


99. Chen, B., Zhang, Z., Huang, Y., Li, L., and Lu, Q., 2008, "Thermal Simulation Analysis of Welding Repair Process for Roller Material Cr3", Welding & Joining (in Chinese). doi: 10.3969/j.issn.1001-1382.2008.03.009.


100. Zhang, C., and Li, L., 2008, "A Friction-Based Finite Element Analysis of Ultrasonic Consolidation", Welding Journal, 87(7), 187s-194s.


101. Kar, T., Scheiner, S., and Li, L., 2008 "Theoretical Investigation on the Mechanism of LiH + NH3 -> LiNH2 + H2 Reaction", Journal of Molecular Structure: Theochem, 857 (2008) 111-114.


102. Li, L., and Davis, T., 2007, "Effects of Purging Gas Oxygen Levels on Surface Structure and Mechanical Properties of GTA Welded Type 304 Stainless Steel Tube", Journal of Advanced Materials, 39(4), 14-19.


103. Li, L., 2007, "Mechanical Properties of Cast Nickel Base Superalloys -- An Interpretive Report", Welding Research Council Bulletin 518, ISBN 1-58145-525-9, ISSN 0043-2326, Jan. 2007, New York, NY.


104. Li, L., 2006, "Repair of directionally solidified superalloy GTD-111 by laser-engineered net shaping", Journal of Materials Science, 41:7886-7893.


105. Li, L., Liu, Z., and Snow, M., 2006, "Effect of Defects on Fatigue Strength of GTAW Repaired Cast Aluminum Alloy", Welding Journal, 85(11), 264s-270s.


106. Li, L., 2006, "High Performance Cast Gamma Prime Strengthened Nickel Base Superalloys -- An Interpretive Report", Welding Research Council (WRC) Bulletin 511, ISSN 0043-2326 (ISBN No. 1-58145-518-6) Welding Research Council, May 2006, New York, NY; 117 pages.


107. Li, L., Orme, K., and Yu, W., 2005, "Effect of Joint Design on Mechanical Properties of AL7075 Weldment", Journal of Materials Engineering and Performance, 14(3), 322-326.


108. Li, L., 2004 "Failure Analysis of Aluminum Alloy Swing Arm Welded Joints", Journal of Failure Analysis and Prevention, 4(3), 59-64.


109. Li, L., and Messler, R.W., Jr., 2003, "Effects of Phosphorus and Sulfur on Susceptibility to Weld Hot Cracking in Austenitic Steels", WRC Bulletin 480, ISSN 0043-2326 (ISBN 1-58145-487-2), Welding Research Council, April 2003, New York, NY.


110. Li, L., and Messler, R.W., Jr., 2002, "Segregation of Phosphorus and Sulfur in Heat-affected Zone of 308 Stainless Steel", Riv. Ital. Saldatura (Italian Welding Journal), No.4 Lugligo/Agosto 2002, 511-518.


111. Li, L., and Messler, R.W., Jr., 2002, "Dissolution Kinetics of NbC Particles in Type 347 Stainless Steel", Metallurgical & Materials Transactions A, 33A(7), 2031-2043.


112. Li, L., and Messler, R.W. Jr., 2002, "Segregation of Phosphorus and Sulfur in Heat-affected Zone Hot Cracking of Type 308 Stainless Steel", Welding Journal, 81(5), 78s-84s. pdf


113. Li, L., and Messler, R. W. Jr., 2001, "Separating Effects of Phosphorus and Sulfur in Weld Cracking of Austenitic Stainless Steels for Technological and Economic Benefits", Journal of Advanced Materials, 33(4), 3-13.


114. Li, L., and Messler, R. W. Jr., 2000, "Stress Relaxation Study of Heat-Affected Zone Reheat Cracking in Type 347", Welding Journal, 79(6), 136s-144s.


115. Li, L., and Messler, R. W. Jr., 1999, "The Effect of Phosphorus and Sulfur on Susceptibility to Weld Hot Cracking in Austenitic Stainless Steels", Welding Journal, 78(12), 477-s.


116. Messler, R. W., Jr., and Li, L., 1997, "Weld Heat-affected Zone Liquation Cracking in Type 347 Stainless Steels", Intl. J. Science and Technology of Welding and Joining, 2(2), pp. 43-52.

Back to the Main Page